Font for a bath with their own hands - a phased technology for creating fonts

Craft font for a bath can be several ways to mount a concrete font, make a wooden or plastic to buy analog.Step by step how to install the font looks like.

Step 1 - Select the location where you want to install the font

Site for Hot chosen according to your preferences, as well as the need to take into account the proximity of the location of your bath.Lovers of water treatments on the street most of all be happy, if the font is in the open air.And when in the bath there is a lot of space, you can set the font and indoors.

By way of editing the font is classified into:

• buried;
• oblivnye;
• open.

Step 2 - Define model font

When creating a font for the bath rooms need to carefully consider and justify the choice of materials for a particular capacity model.

As the materials used fonts can be:

• of wood;
• concrete;
• of plastic materials.

type font and its design features are selected on the basis of the planned number of people who are at the same time immersed in the tank.Sometimes performed directly in the bosom of the container specially provided with seats, or simply made "private", which will be enough to plunge several times.The font can provide additional functions such as heating, hydro and others.

Step 3 - Prepare the site for the installation of fonts

• to install recessed font provides the following steps:
• in accordance with the intended volume of installed fonts need to dig a pit.In
• formed and pre-peeled pit mounted formwork.
• then laid reinforcement bars and poured concrete mixture.
• on finished concrete foundation is laid waterproofing.

Font concrete

By the way, what brand to choose concrete read here - to choose what brand of concrete here.

When the street is planned to create the font while visiting her two visitors, these events can be omitted.

Making fonts concrete takes a long time.To begin dig a hole the right size and clean it.Font - a tank or pool, and it can not do without the device more gravel-sand cushion.It will support the font for support.Then, the x \ b cup.Reinforcing concrete, using a single-layer reinforcement, 8 mm in diameter, paving the bars every 300 mm.

There are requirements for the concrete used in the manufacture bowl: its main quality - water resistance and durability.Thus, per 1 m3 of concrete, gravel, cement, sand mixture, water is taken, respectively: 1270 kg of gravel, 327 kg of cement, 625 kg of sand, 177 kg of water.Concrete ready-to buy the plant.About brands and properties of concrete here.

Inside waterproofing bowl using an elastic membrane, followed by, based on a special adhesive, laid tile layer, or ceramic tile.After that is necessary to make the grout seams between the tiles.At the device of a concrete font should be timely communication to bring supply and drain water.

Wooden Hot

tree is most often used for the construction of fonts.The selected type of wood will depend on the effect of bathing.

• Cedar font contains essential oils could cause the skin become tender.Cedar boosts the body's defenses at the expense of any contained volatile production.
• font from oak wood has a calming effect, positively affecting the nervous system and normalizes metabolism and accelerating the regenerative processes in the skin.
• Deciduous Hot able to normalize the pressure, larch extract cleanses pores.It is strong and durable.

Install recessed font

In-depth device fonts need to dig a pit, make its sweep, build fences, carry out the waterproofing and the lining.It is imperative to provide the equipment for the water supply and its drain.This option is quite expensive and time consuming.

Installation open font

open the font is much easier to produce.To do this, you need to purchase a tank of the desired volume of wood or polypropylene, install it on a solid foundation, connected to water and sanitation and make the finish.In recent years become especially popular plastic font.Their installation is different economy, and among the advantages can be identified practicality, durability, resistance to cracking, scratching, easy care.Tech polypropylene 100% safe.

Pools of plastic produced in different sizes and shapes.Completing font railing, seat, steps.To make the font attractive appearance, plastic containers sheathe the wooden apron.This is easiest to do, erecting perimeter frame for the font, then securing it bunk.

Installation font oblivnye

This is the most economical type of font.The wall is built in system that allows you to overturn the basin or tub of water by pulling the rope.With the return to the starting position of the tub, he again filled with water.Water supply is regulated by a special mechanism, based on the float.Be sure to read about the production of baths from the logs.

Video - Hot bathing their hands