Why and where necessary heating furnace with a water circuit ?

How do the heating furnace with a water circuit?

In furnaces with a water loop heat exchanger built into the firebox or flue duct.Some models are able to function in the circulation mode, hot vapor, which is removed in a standard hot water circulation system.These furnaces produce boiler of cast iron or steel, which is designed for stable operation under high pressure steam.They are used, and as the main source of heating premises and as an accessory.

heat exchanger located inside the instrument.The heated gases pass through the channels and heat transfer heat reservoir water.The design can be used several tanks, which significantly increase efficiency.One heats the water reservoir, the second heating increases to steam generation.To warm-up steam is the most effective, you need to get the highest temperature readings.In this connection, it is recommended to allocate a separate boiler room.

Note!This does not apply to the beautiful wood-burning stoves, which are designed for installation in the main room.

Should we choose them?

stove with water heating, as well as any other device that has its own advantages and disadvantages.To decide whether it is right for you, these factors must be taken into account.Consider more detail.

Advantages:

• High performance.Such furnaces are capable of qualitatively warm up the room and the house with a large area;
• affordable price.This equipment is much cheaper than other heating devices (less cost only boilers);
• fuel availability.Oven with water heating can run on coal, peat, coke or wood;
• No need to pay for electricity.The system is based on the principles of natural circulation, so it does not need electricity supply.

data heaters also have disadvantages that need to be taken into account when buying:

• low level of efficiency.Manufacturers of such furnaces assure that the efficiency reaches 80 percent, but experts say that these figures are significantly inflated.The oven with a water circuit is not able to match the efficiency with gas or diesel boilers;
• Manual.All devices that are powered by solid fuel, have a common drawback: there is no way to configure automatic delivery of fuel and lead a normal control operation.

Note!Despite its shortcomings, the oven with a water circuit is widely used due to its low cost and simplicity.

Species

furnaces Stoves for home water heating are divided into two types, designed for heating large spaces and designed to heat large amounts of water.heating devices are arranged so that 90 percent of energy is directed precisely on this task, and only 10 percent is used for heating.The heated water is supplied to the heating system or to the accumulator.Another type of furnace is directed to housing heating.These models have special bins for wood pellets.

In addition, the furnace with a water circuit and have differences in appearance.Models are usually cheaper hob for installation and use in the kitchen, and as they warm, and allowed to cook.More expensive models - a fireplace stoves.They have a cast-iron stove and a variety of decorative ornaments.

Note!The most interesting option is considered refractory furnace glass door, through which you can see how the flame burns.