Assembling Chandelier with remote control

chandelier How to connect the remote control

To connect modern chandelier, it is necessary to start to assemble it correctly, and this is how:

1. At the first stage of the acquisition, all the parts are sealed with a special film on the impact of domestic and small scratches.It must be disassembled, peel, fasten all the items you want, then insert the bulb.

   

2. himself lamp includes a special receiver, the different blocks for power LED lamps, as well as the controller.All this must be well attached to the installation nothing fell.double-sided tape is used most often.

   

Repair luminaire with LEDs

very common problem is when the light is not functioning.First we need to all to check the serviceability of batteries in the remote control, the arrival of electricity, power supply units.If after all vyssheskazannogo chandelier will not run, therefore, the matter can be a controller failure, ie the receiver.It is always possible to change the remote control and receiver, respectively.

also not always recommended for such lamps are very powerful halogen light bulbs, may suffer from such a transformer installation or cartridges.It must be remembered that the replacement cartridges in such a lamp is very problematic and costly exercise.

Too many do not use the controller from the instrument and carry out the connection through a conventional switch, this is the case, if your chandelier is not included and is not working.This unit includes a two types of radio relay, which produces lights on, the same functions and produces the most common switch.According to this, if your controller is broken, you can safely connect the chandelier through the switch, just in this case, the hand will be used.

The device has two power wires at the input, such as via a switch and zero.They are marked with different conductors, different color characteristics.Black is zero, which passes through the lamp power to zero, and the phase will be the red wire, it passes through the switch on the lamp, more precisely on their phase.In this case, use the blue and white.Sami bulbs are attached not to the full, and in nutritional blocks, but the scheme of that does not suffer.