pools Ventilation: what data are needed to calculate ?

Air exchange in the pool, the importance of respecting

parameters When constructing any pool require certain parameters: air temperature of about 27-31 ° C, water 26-29 ° C, humidity of about 50-65%, the concentration of chlorine & lt;0.1 mg / m3 of air per person 80 m3 / h. By increasing the temperature in the pool (for example, with additional heating) and increases the amount of moisture that begins to settle on the mirrors, walls and other surfaces.

Meanwhile, constant high humidity leads to very adverse consequences.The man begins to feel unwell, there is discomfort, decreased performance and mood worsens.Excessive moisture leads to the formation of mold and mildew, as well as the detrimental effect on the structure of the building.

would seem possible to dispense with heating and then there will be high humidity, and ventilation rate in the basin will be optimal.(Number of air - a number that indicates how many times a changed air in the room for 60 minutes).But nevertheless necessary to observe the optimum parameters of the level of humidity and ventilation.To maintain a proper set of indicators often forced-air ventilation.As a rule, this system pool ventilation works in automatic mode and allows you to monitor the required parameters.

Calculation

pool ventilation To choose which of the standard by the pool ventilation solutions to your needs ( forced-air system, air driers or complex installation ), it is necessary to carry out the calculation of ventilation.To this end, it is important to gather a number of mandatory data.

Firstly, they include background information on the technical characteristics of the room, layout, condition of the heating equipment, the customer's wishes.Second, do the calculations for air exchange, allocation of water;Duct wiring system, the selection of automation equipment and sensors.Thirdly, the scheme should be agreed with the customer to sign a contract for the installation of the system.After that, only the specialists get to work.

Attention!If you want to get your own pool ventilation future, it requires compliance with certain rules SNIP, as well as the relevant skills.If you've never done this before, it is not recommended to do it yourself!Ask for help from qualified professionals.

Selecting the ventilation settings for

Basin As mentioned above, depending on the calculation and the customer's wishes can be setup ventilation, dehumidifiers or complex installation .The first system is considered to be the cheapest and best for premises.

It provides fresh air, as well as the maintenance of indicators due to temperature and humidity.This unit includes: Fresh air filter, supply air fan, the air intake device, a heater for cold air (in winter).Exhaust air is removed via the exhaust fan.

The second method - the use of dryers - used when the air handling unit, for whatever reasons, can not be installed.The moist air taken from the room and is cooled to lower the dew point.The remaining moisture is removed in the sewers, and the dried air back into the room.

Well, a third way, installation of complex installations, requires not only ventilation, but also the space heating, water heating in the swimming pool dehumidification.This system is the most expensive and works on the set parameters (automatically properly maintain the temperature and humidity).