How to outweigh the refrigerator door

preparatory stage

Before you begin, you must first determine whether to changeable door possible.It is possible to carry out in the presence on the opposite side of it and special plugs rotary hinges.Required for this process, additional fasteners are usually attached to the refrigerator equipment.If they do not exist, it is necessary to purchase the relevant details required of the manufacturer.

necessary to prepare the flat and Phillips screwdriver, several wrenches.Further, the device is disconnected from the network and removed all shelves and jumper.Flat screwdriver is necessary to dismantle the plugs with screws to dismantle the handle, then lifted mount.To avoid deformation of the bottom of the loop, you need to hold the door after removing the upper mounting.After the bolts are unscrewed, the doors are removed.

changeable door: guide

1. Before outweigh the refrigerator door, you need to install the mirror existing swivel mount or use the items included in the kit, on the other side of the door leaf, and then opening them closed plasticplugs.
2. door gently placed in the bottom mount, then tighten the top and adjust the density of its closing.If necessary, reset the open door sensor.
3. Set to a new location handle, shelf recycled.

Features of the perenavesa

• In identifying opportunities perenavesa doors should immediately determine suitable if both loops mounted on the door, for mounting them in the mirror position on the other side of the door, can be done if necessarydates of openings independently
• If the refrigerator is a two-door, you need to check what type of attachment have doors - separate mount allows, if necessary, to outweigh only one door, and easy to install, and at the combined attachment process situation will be a bit more complicated as it is necessary to remove the two flaps simultaneously
• some models are inside the loop of decorative elements that are changeable front doors must be removed, and then get to work.
• If the door has a control panel display, the door will be accompanied by the preponderance of disconnecting a special cable, which is located at the upper attachment, and then need to remove the top cover of the refrigerator, providing access to the panel, and then move the cable, and the process goes according to the above instructions.

Before outweigh the refrigerator door, you need to take into account the availability of all necessary materials and tools, and after completion of the installation carefully adjust the density of the closing doors.