Screws for corrugated board - are studying a variety of mounts

secret of the successful use of corrugated

Every person wants to have a beautiful and comfortable home in which to live for many years, and to leave to his children.And the excellent assistant in the implementation of these ideas can be profiled.This material allows you to build a beautiful and sturdy fence for the site to protect the roof of your home, as well as update the old wall covering.

Profiled - is corrugated sheet, made from galvanized steel by cold rolling.In appearance it is corrugated sheets of various shapes.Have a sine wave, trapezoidal, and rounded.

But the appearance of choice is not limited.To this material for a long time served as a good feast for the eyes, it must be properly fastened.Mounting Method every handyman chooses their own, but to protect themselves from intruders and weather anomalies, fastening must be reliable.There are several types of fastening, it is worth considering them in detail.

Screws for corrugated board: characteristic

Very often in places fixtures can observe the formation of rust.To avoid this, you must use a

amorezy for corrugated with EPDM gasket .They are made of galvanized stainless or carbon steel.Applications: roofing, construction of fences and walls.Also, these screws produce a colorful coating, which makes them invisible on the background sheeting.In addition, self-tapping screws for profile sheet are of three types:

1. for fixing profiled sheet to a wooden skeleton;
2. for fixing sheeting, exposed to strong wind loads;
3. for fixing ridge elements.

Screws for fixing the sheeting have one distinctive feature, they have a special tip, drill, which allows the use of only one power screwdriver.In addition, working with this type of self-tapping screws can reduce the number of fixing operations, labor costs, and therefore, increase work efficiency.

rivets and screws for corrugated board - particularly the use of

Rivets for sheeting intended for permanent connection of profiled sheet with solid construction materials.They consist of an aluminum cap (steel) and steel legs.In addition, there are uncolored and colored.The diameter of the rivets - 3,2-6,5 mm.Lock flooring is carried out using a special hand gun.On average, 1 m coating used 6-8 rivets.

Screws for corrugated - it stems from the sharp thread and the head.screw rod consists of two sections: the threaded and non-threaded.There are screws for wood, metal and universal.Designed for wood carving are larger than for the metal.They are used to create a detachable connection between the surfaces.The surface

necessary to drill a hole into which a screw is screwed, thus creating a threaded inside surface.

In general, it should be noted that in addition to mounting corrugated board, the scope of the broadest hardware.Hardware classically used in the manufacture of furniture, in mechanical engineering, with finishing works.According to the application, they are:

• for fastening particle boards and wood products, are allocated a rare carving;
• screws to the fence of corrugated different common thread and have a sharp tip-drill;
• for fixing plasterboard sheets, fitted with countersunk head, which avoids deformation of the upper layer of gypsum boards when tightly adjusting to the profiles;
• for roofing, sealing washer equipped with a rubber gasket that helps seal the holes;
• for window profiles and furniture accessories, have a decorative head and a tip-drill with a common thread.