Stained glass film - a little trick to upgrade the interior

about stained glass film

Everyone knows that the stained-glass window - quite expensive pleasure that few can afford.Interior containing at least one such window, dramatically changing its look.But for those who can not afford the classic version, there is one form - film stained glass window.

It is not very different from the original, but its cost is much lower.The film has a self-adhesive component Mylar , which is supertransparency and retains its shape.Color pigment humidity resistant and does not fade.Furthermore, it is sufficiently resistant to corrosive attack and solvents.

By connecting Mylar components and UV filter, painting becomes the most protected from external influences, and compacted.The seal gives the glass shine and protects against damage by means of purification and scratches.

Properties stained glass adhesive film

film stained glass is of several varieties: opaque and transparent, single-colored and multi-colored.There are lots of colors: with a wavy pattern, plain colors, with smooth color transitions, etc.Great look with textured film, the surface of the volume.It simulates plausibly present patterned glass.Use this film for all mirrors and glass surfaces.

It can be glued on the glass doors and windows, with one or both sides.This increases the strength of the glass, and if it keeps the glass-break in the frame and does not allow it to fall apart.If the film is glued on the one hand, then it is better to choose an internal side.

film under the stained-glass window is made a thickness of 75 microns, its transparency depends on the transparency of glass.It can be glued at a temperature not lower than +4 ° C.The advantage of this is the ability to use the stained glass as a surface acryl or tempered glass.Thanks to the use of lead veins of different width and color, stained glass look very decorative.Two-millimeter strands well create small picture elements.

Features film and its use

Stained glass film on the mirror and the glass has several positive characteristics:

• rapid production;
• stained glass strength greater than that made up of small individual glass pieces;
• reasonable price, namely the price-quality ratio;
• resistance to ultraviolet rays, and thus created an obstacle for them;
• moisture, the film is not afraid of water and moisture.

Transparent film stained glass with a pattern for the windows to be glued to skim and clean glass.It is best to treat the glass with isopropyl alcohol.It is not necessary to use aggressive cleaning solvents and their vapors can damage the film, that is, to soften the adhesive and promote the formation of white patches.

After washing the glass of water is not necessary to wait for the complete drying or wipe dry with a cloth.The surface should be damp.This helps to position the film on the surface.

Next film is taken from the wrong side of the paper which is removed a protective layer and is applied to the glass.Then use a dry cloth to smooth out bubbles and chase the water and the air.Then, the film should be dry.The foregoing should be given due attention.