Rubber paving tiles - a practical solution for tracks and platforms

Properties rubber tiles

Paving of crumb rubber good looks and soft to the touch.The rough surface has excellent adhesion to the footwear that does not allow it to slip.Due to the elasticity of the ice crust covering, which is formed in the winter it is easy to cleave itself.

also tile has a good sound-absorbing and damping properties.The material from which produced the tiles are frost resistant, so in the winter at low temperatures, it does not crack or crumble.In addition, it has a wide palette of colors, in which everyone can find a color to their liking.

Paving slabs of rubber resistant to stretching, deformation, curvature, however, so it is convenient to transport.Besides, it does not form cracks and sags.Lifetime it long enough.

From the above, the following benefits can be distinguished:

• Durability - life is not limited;
• not crack - a good cushioning gum base;
• There is no dust or dirt does not accumulate;
• Maintainability - easy replacement of individual tiles;
• not require special care - due to its composition it is not necessary to paint;
• not slip - a short drying time after rain.

Application of rubber paving tiles

Paving rubber - universal coverage.With it you can draw an original as the garden paths, and the whole site.Most often it is used for arranging sports and children's playgrounds.Such coatings are simply irreplaceable in the locations of children.

more rubber tiles used to cover pedestrian areas in parks.It becomes necessary materials and equipping sites near pools, ponds and other facilities where high humidity is present.On the tile does not accumulate water as it passes through the water itself.In addition, it can be laid on the floor in the garage or in the premises with animals, for example, in the stables or barns.

Tips for laying tiles and operation

tiles have to be laid on a flat surface.The base may be asphalt, concrete screed or compacted soil.It is desirable that the surface is slightly tilted, so that rain water can drain off without any problems.

If the plate has a thickness less than 30 mm, then it needs to be laid on a solid surface, and any base is suitable only for flat elements is greater than 30 mm.It is easily cut by a knife or jigsaw.Because of this it can be customized for any shapes and sizes.

To fix the tile is better to use rubber-bitumen mastic or adhesive polyurethane.Laying can be made offset or straight rows.Some species do not require the use of pins as they have such a shape that creates a locking connection.

Rubber tile requires no special care.This coating abrasion and impact resistance and elasticity.To remove dirt, simply drench it with water.If there are stubborn dirt, they need to soften the soap and warm water, using a soft brush, then rinse with clean water.

can wash it under great pressure, but the direct impact of water on the tiles should be avoided.The distance from the surface of the hose should be not less than 300 mm, and the water is warmer than 80 ° C.