Leveling the floor with their hands : screed on beacons and adjustable floor

screed floor screed - a universal method of long-lasting.It's suitable for any type of further topcoat, is able to hide communication system and underfloor heating, as well as on its own can be a decorative way to finishing the flooring.All these advantages explain the unparalleled popularity of ties as a draft or final finish coat.The method is suitable for residential, non-residential, industrial, commercial and other premises.Maybe unreinforced and reinforced.

main disadvantage - the big weight of the coating, however, there is a loophole to avoid an excessive load on the overlap - for example for thermal insulation and a thickening layer of expanded clay can be used.The method requires a large amount of labor and skill, and a very prolonged in time.Waterproofing - is necessary to prevent leakage of the composition.However, even with this list of shortcomings leveling the floor with their hands through the tie is quite possible to implement a layperson.

Semi-dry screed

method is identical to the previous one except that the possibility of leaks on the lower floors is reduced almost to a minimum.For high-rise buildings, of course, this way of priority due to the absence of threat of accidental damage to property.

Self-leveling floors

All kinds of liquid mixtures, in addition to polymer - this is also one of the varieties of the screed.However, this option is to implement their own hands will be much easier, thanks to the physical characteristics of the solution.As its name implies, the mixture does not require the installation of beacons.The main thing - is to pour the solution evenly over the surface of the room, and then the composition itself under the force of gravity to adjust to perfectly flat surface.

floors, with the exception of polymer mixtures of liquid, it is also a kind of tie.However, unlike the traditional ties are less cumbersome in the works.This is achieved thanks to the special composition of the mixture.If the alignment of conventional grout must be installed beacons and careful smoothing, the self-leveling floor is a self-leveling.Those.it is enough evenly applied to the surface.Further, under the force of gravity, he will perfectly horizontal position.

Such a mixture would be an ideal basis for absolutely any finish flooring.In technical areas may not require additional coverage.

Despite a certain complexity of the implementation of any of the types of ties, this method is how to implement the alignment of the floor with their hands, not just a place to live, and truly deserves its popularity.The versatility and durability of this type of floor speak for themselves.

Wooden floors Wooden floors

inferior cement screed about longevity, but just as a few years ago, is popular.It is due to the greater speed and ease of installation, rapid commissioning, soundproofed and insulated properties.

-floor joists

most common type of wooden floor - design on joists (the wooden sticks or boards set on edge).Laghi set on the base (can even just on the ground), and have them mounted board.Thus it can be realized as a subfloor (requiring additional coatings) and finishing - all dependent on the quality used of the board.

voids between the joists under the boards may include insulating materials, to conceal communications.

This option is quite easy and short to implement on its own, then it will be immediately ready for use.

Advantages are obvious, but there are some drawbacks.Wood - a natural material short-lived.He categorically not suitable for "wet" areas, areas with high humidity.And even in suitable premises after a dozen or two years, wood flooring will crack and creak, and may sag.In such cases it is possible to align the wooden floor with his hands.

How to align the wooden floor?

If curved wooden floors creak and the need to determine how damaged their components.It was hopelessly damaged items should be completely replaced to eliminate the creaking wooden floors and irregularities.Most often enough to replace the substrate - a thick plywood or boards, which are attached to the joists.However, it also happens that requires a complete overhaul of the wooden floor, where it is almost necessary to completely remove and replace with new.

Adjustable version

You can not just take and give up the advantages of the wooden floor, so the engineers came up with the design method, called adjustable floor.In this embodiment, the joists will not installed on the base, and is firmly fixed to a special design.Finishing materials can be absolutely anything.

In this case, the user space is the ability to effortlessly adjust the height of a particular area.Implement leveling the floor with your hands, if you have installed adjustable design - simple.

Dry screed

ideal way to leveling the surface - it combines the advantages of both ties and adjustable design.In this situation, poured and leveled by the level of particulate filler, which is covered with sheets GVL.The only and the main disadvantage of this method - the sensitivity to moisture, so it is not appropriate to categorically "wet" areas.

Conclusion

Which way to choose a floor alignment - is not so much a matter of preference, as the issue of options.Basically, it all depends on the original materials used in the floor structure, but even in this case there is room for reflection.