Build Daily

Rooms

August 12, 2017 18:08

How to choose a siphon for bath - reviews and guide .

click fraud protection

Photo siphon device and its variants

siphon bath designed to sewer odors and gases do not penetrate into the living room.It forms a kind of water seal.Siphon device everyone should know the owner, not the cause of any petty clog the plumbing.The device it is quite simple.There are four main elements:

  1. drain spout, which is integrated directly into the bath hole.In turn, it consists of a neck lower part which is expanding nozzle, and the top of a chrome plates.Between these two parts enter into the bottom of the bathtub and connect them with each other a metal screw.For sealing the siphon is equipped with a sealing gasket.
  2. overflow spout is arranged similarly to the drain, but its purpose is different.It is necessary to ensure that the excess water from the bathroom went through it in case you forget to close the bathroom water.Thus, it is your savior from neighbors flooding below.Siphon
  3. - a curved nozzle which can be of various shapes.There is always water, which is the gate of odors.It plays an important role of this water.If it is too little ventilation and broken sewer riser, you can suck the water.It is better to choose a deep siphon volume 300-400ml.
  4. Corrugated bight, which serves to connect the overflow with siphon.

branch pipe through which the siphon is connected to the sewage system.It can be tough and corrugated.Hard more reliable, and easier to install corrugated and its length can be adjusted.

Siphon for bath

Siphon for bath

siphon

Siphon for bath

bathroom with siphon

Instructions for installing the siphon for bathtub with his hands.

Buying siphon for bath, when we find him on the assembly instructions.It would seem that if you follow it, even a child will cope with this task, but generally there are all sorts of questions and uncertainties.To assembly process has become more clear, follow the points:

  1. If you decide to change the old to the new siphon, the old must first be dismantled, and the place where he was thoroughly cleaned so that the new gasket is securely grappled with the surface of the bath.
  2. First take the lower overflow, put it in the gasket, and all this puts a hole under the bath.At this time, on the inside of the tub to drain hole impose an upper cover, insert the screw and fasten it.Let you someone to help, because it is difficult both to keep the lower part and tightly screw top.The main thing is not to overdo it and do not tighten too tight - plastic siphon may burst from excessive effort.
  3. Do the same thing and with overflow.
  4. Next you need to connect the overflow drain with a corrugated hose.If it is longish, it is not necessary to shorten, just bend smoothly.Remember that the first nut is pushed on the corrugation and then laying, and, gasket should fit fine end to the neck.
  5. to the neck, attach the valve.Be sure to check the quality of the connections for casting defects or burrs, they can depressurize the drain.
  6. Set corrugation to a water gate.
  7. We connect the siphon to sewerage system through the seal.

remains to check the build quality of the water element.If there is no flow, it is possible to use the bathroom, you coped with the task perfectly.

instagram viewer

Categories

Latest Blog Post