How to paint the ceiling is water-based paint - will know the process from all sides

How to paint the ceiling latex paint - weigh the pros and cons

Presented structure is manufactured as follows: the pigments are introduced into the water-based and mixed with a binder.can be used to reconstitute the powder is not solvent, but just clean water.Until such time as you begin to finish, you need to know how to paint the ceiling latex paint, it is desirable to identify their strengths and weaknesses.

advantage finishes include: water vapor permeability, the use in damp areas, ease of application, a variety of shades.Also, this finish does not peel off over time.Especially mixtures are clean from environmental point of view and do not emit harmful substances.However, there are disadvantages: you can not apply them to the metallic elements.The rest of the material presented has drawbacks.

How to paint the ceiling latex paint - types of working compositions

necessary to define the kinds of enamels, because of this depends on their scope.For example, you can select

acrylic blend.They can be used for decoration of ceilings and other surfaces.However, they are very expensive.Moreover, they are not recommended for finishing ceilings in rooms with high moisture levels.

silicate mixture can be used in any room, as they are well pass the air and have good water vapor permeability.The surface finish looks perfect after more than 20 years.But they can not be used where there is a likelihood of exposure to atmospheric moisture.

Silicone enamel are the best among all kinds vodoemulsionok, but they are not cheap.They can be used for almost any ceiling, the more they are able to mask the cracks of a width of 2 mm. Mineral compositions can be used for decoration of the ceiling in the bathroom or kitchen, as they are best suited for areas with high levels of humidity.

Preparation for painting the ceiling latex paint, and the progress of work

Prior to properly paint the ceiling latex paint, it is advisable to choose the tool.Apply the mixture may be a brush or a roller, and do not need to use a foam roller.For roller need to pick up a tray.We will understand well, what is the ceiling of preparation for painting with water-based paint.

He must be perfectly smooth, clean of dust and the old building is dry.it must be before finishing putty.

How to paint the ceiling is water-based paint, the video can be found within our articles.However, you can help and these simple tips.The mixture must be diluted for finishing, based on the instructions.First you need to mix it, and part of the cast in the tub.If you decide to add color, then right now you can do it.But keep in mind that dries, the surface is lighter by several shades.

Then with a brush outline the work of the border.To do this, hold the brush on the ceiling along the line of the wall, and you need to retreat from the wall by a few centimeters.Starting work needed from the window.Then the roll is dipped into the mixture in the bath, and the excess liquid must be removed.Now you can go to work.Movements should resemble the letter W.

Since vodoemulsionkoy finish must be done in 2-3 layers, the first layer when the need to move the roller across the path of the rays of the sun, and the second layer - along.It dries the surface in 12 hours, so you need to apply a new layer at the specified time interval.If you do not have instructions seemed clear, the process will demonstrate how to paint the ceiling latex paint, video on our website.