Metal fence with his hands

kinds of metal fences

First of all, you must determine the type of fence, of which there are several.The most common and popular are often the following:

• forged.This is the most expensive fence and a status.Order forged sections is costing the owner a lot of money, but a fence will serve without any prejudice to the reliability and external pronounced aesthetic appearance over decades.Care is not required.
• welded.Is a fence for any kind of areas, which are reliable and full compliance with safety requirements.
• Fences made of corrugated board.They may have the most diverse range of colors and options for surface coating, as well as many opportunities for the installation.Thus, the fence of corrugated board in the price category is practically no competition.

Materials for the installation of the metal fence

Before proceeding with the installation of metal fences, you need to think about the materials that will be required for the work.Let's look at their list for a fence made of profiled sheet, because it is one of the most economical types of protections:

• Wall proflist NA (wave of 8, 10 or 15 mm);
• corners or metal pipe for large diameter columns and less to lag;
• holders and brackets for mounting the fence without welding;
• M6 bolts (30 or 20 mm);
• Threaded plugs (for the M6);
• Screws for roofing.

Installing metal fence with their hands

Fences made of profiled sheets are not equal to the combination of quality / price aesthetic features / installation speed / quality / durability.Let's see how to install a fence made of profiled sheet in his own step by step instructions.

1. produce site layout.To do this, set the two pegs into the ground at each wall fence support.Between them stretched string, which allows to make all selections for drilling holes in a line.
2. Given the standard width of the profiled wall sheet and the length of the fence should be to determine the step size of the supports.By default, this value is between 2 and 3 meters, mostly in the region of 2.5 m. In the field of the future pillars placed stakes, and after it is drilled wells.
3. With a garden drill holes is done in diameter of 20-30 cm and the same depth.Themselves bearing set, hammering into the ground with a sledgehammer, much deeper, usually to a depth of 1 m.
4. Wells round the pillars poured gravel and tamped it, and then fill in the space between the liquid concrete stones.The next step can be carried out only after complete drying of the support base.
5. cross bars can be welded or fixed with screws.It is important to do this butt for greater aesthetics metal fence and to save the space occupied by them.
   

   Note!When buying a fence for trapezoidal sheet only consider it useful, and not the overall width.Installation is overlapped by placing the wave into a wave.

6. main fence material - wall profile sheets.Select the type can be, depending on personal preference (galvanized, coated with a polymeric layer of color, with a slight wave).Mount the steel sheet using roofing screws to match the material.To avoid damaging the anti-corrosion coatings are used for mounting rubber pad bolt.

details on installing a metal fence can be seen on the video in the next tab.