Sealant thread as an assistant for installation of pipes

thread sealant: types and material differences

Sealant for threaded connections used for domestic purposes, may be of three basic types:

• Teflon tape type having a large number of shortcomings, is the most simple type of material;
• Mastic and hemp, which can be called the oldest methods of processing threads;
• thread sealant, developed on the basis of special solvents.

Important!Choosing quality means allow to be assured as a threaded connection, especially in the case of gas pipes.

Teflon tape is quite cheap, and that influenced its distribution and high demand, but this tool has an impressive list of deficiencies.Firstly, such a sealant may contaminate the pipe.In addition, this belt is quite bad resists dynamic types of loads that are simply destroying the integrity of the material.An important drawback is the absence of any fixation that does not allow to check the density of winding the tape on the threads.

Sanitary sealant consisting of tow and putty, rather inconvenient to use, has a strong creep and shrinkage amenable.All this becomes a cause of poor sealing of pipe material.

use of one-component composition sealed

If we talk about sealants for plumbing, then the best option is a one-component paste, the ability to quickly, reliably and extremely pure fulfill all the required tasks.This product has many positive qualities that can influence the choice of the masters of the repair business. Important!The paste should be chosen depending on the material from which made themselves pipe .

paste composition is such that you can carry out installation work with the utmost clarity and speed.It is noteworthy that this product has no shrinkage properties or dirt tube inner space.Relative density paste filling structure allows even microscopic cracks in pipes, which eliminates the possibility of leakage of liquid or gas.

How to avoid common mistakes in the application of the paste?

use of any sealant, not necessarily a one-component paste, implies a detailed assembly procedure following that prevents poor connection tube material.Improper installation of pipes will inevitably lead to leakage through an indefinite period of time.

Important!Do not allow mistakes in the choice of means of sealing, because it will bring to naught all the efforts of the installation.

pipes should be cleaned and degreased before you apply the sealing means.Otherwise, the connection quality is quite low, such that the work is unacceptable mistake.The distribution of the substance on the surface of the part should be uniform and without obvious excesses.

In the case where the thread used has a large size, the material should be applied to both items to fill all the voids in the thread.When removing the material must be heated to 250 degrees thread temperature if the tube is not plastic.