How to drill a brick wall : Equipment for the beginner

Toolkit to punch a hole in the brick

To make a hole in a brick wall, you can use many techniques and tools, but we will talk about the most effective implementations tasks.

What you need to drill a brick:

• Plugs;
• pobeditovye drill;
• Drill;
• Punch;
• Screwdrivers of different species;
• capacity of water;
• face shield and goggles.

How to drill a brick: training tools

For a good work with the tools you need to ensure proper operation, so check to see if a sufficiently powerful tool you have available:

• Drill.Should be 2500. / Min.s reverse rotation and samozhimnym cartridge.Drilling will be slow, but the drill has to be heated quickly.

Brick must endure static electricity.

• Punch.Suitable ideal for such a complex task.

• drill.For the work you need to purchase a drill with 5 and 8 mm.Only they can work with pobeditovym glass - the most durable material that is easy to handle even the most seasoned durable brick.
• Plugs.They can be purchased at any hardware store, in accordance with a drill.
• Boer.If you plan to drill through the wall, then apply the drill, as he rounded but well-cutting tips, which also increases its resistance to all kinds of influences.

Drill a hole in the brick wall: the preparation of the wall and marking

preparatory phase in drilling is the need to identify and mark the place on the wall where you would like to see the hole.This is very important because in the wall can be electric, which is damaging the problems will not be gathered.Therefore, use a metal detector to detect wires or read the article "How to find hidden wiring" on our website.

order not to run into a wall in communication, in the framework of security, doing his own hole 15-20 mm and, if everything is normal, you can use a drill.

How to drill a brick

1. To mark the new holes in the wall using a core (tool for pit marks).It will help keep the core at a particular location, and because drilling is clear.

1. Wear safety glasses and shield to protect themselves from dust and debris.
2. tool right place, otherwise the drill could break.
3. drilling is necessary so that the pressure on the drill was very soft, and it will provide some sort of uniformity.The same load will allow the unit to cool yourself at the right time.
4. After working drill carefully remove the gloves and put into the water.Either whole tool is placed in a container, but only on the level of the drill.
5. -burned bricks drill harder, so if you see the different bricks (darker than normal), then turn the lower speed and be careful and gradual.And besides, you can not avoid overheating of the drill at high pressure to it.

1. If the bit tense to the limit temperature, as you'll notice, for it is by no means impossible to touch, to protect yourself from any kind of traumas and burns.
2. important point still touching the heated drill, as it may blunt the edge because of his chilling.
3. For drilling often use diamond drilling, which in a short time gives a good result, saves time, holes are obtained stable.

also see videos of how is drilled properly, following the rules and safety regulations.

1. for drilling more than 30 mm is used kernosverilnuyu plant, which is also very fast making holes.But to work with it need professional skills.
2. If you want to drill a vent, the hole should be 18-20 cm in diameter.To do this, use the drill of hard metal.By marking bore holes, and then, with the help of pobeditovye drill, hammer and chisel knock the remains of a brick wall.