Spatula for grouting - as it should be ?

What is the trowel for grouting?

main purpose grout trowel, which in Soviet times did not even know, is the grout tile joints.This determines the number of its features.Firstly, such a product has a greater length than its conventional analog paint, which creates a certain convenience when working.The larger the width, the faster the grout.

Secondly, spatula often has a wooden or plastic stick, due to the ease of these materials.Third, his painting work is usually quite thin and has a rounded end with a grinding relief for grouting.It is performed usually of rubber.

for sale can be found in the form of a traditional trowel blades, but it is not too easy to use.

Thus, the most preferred tool for performing grout work is a rubber spatula, on which there are a number of reasons.When mixing grout such product avoids damage to the surface of the container used, so you can be sure that the structure will not get any foreign objects.

In addition, a certain degree of flexibility and softness of the rubber allows the most efficient and accurate utaplivat grout in the joints.

Practice shows that the black rubber trowel for grouting is more convenient to use than white, because white is too soft tires.

preparer

So, you choose the most convenient tool for grouting, you can now proceed directly to work.grouting technology is quite simple and involves five basic steps:

• purification of tile joints.
• preparation (kneading) grout composition.
• its direct application.
• Grouting.
• cleaning surfaces.

no secret that after laying tiles or artificial stone in the joints is often the glue.If he was not removed during installation it is necessary to do this before you start grouting.To remove it, you can use a spatula, stationery knife, or even a screwdriver.Remember that the work must be done carefully, otherwise you risk damaging the coating!After cleaning, the joints can start kneading the grout.

It's worth noting that it is a quick-composition, so you should not get mixed up a lot at once.Take a suitable container, pour grout and add water.Typically, 1 kg enough grout 0.3 L of pure water.Errors in the proportions are not afraid, because the volume of the components can be easily adjusted.Mixing should be performed very carefully, since undispersed particles impairs the appearance of finishing.

tool for grouting - use correctly

After the preparatory work can safely proceed to the grout joints filled, which is necessary and spatula.At an angle of about 30 ° it is lowered into a container with a composition that readily adheres to the spatula in sufficient quantity.After that, he is brought to the seam to one side or another, to a sufficient amount of grouting directly and immediately got into the seam.Experts say that this is enough for two tuned movements.

first movement of the composition is rubbed into the joint, and the second removed its surplus.Application of grout on the surface is carried out only after complete drying tile adhesive!

Immediately after applying the grout composition is necessary to carry out grouting.For this purpose it is carried rounded end a rubber spatula, giving the seams final relief.To correct it may be, even the fingers, if the composition did not have time to dry.If the grout needed in tight spaces, it is recommended to use a narrow putty knife to a long wooden handle.Application of the composition is carried out web tool and jointing - his pen.

final stage of processing of tile joints is to clean the surface.Start can be 1-2 hours after grouting. get to work early, you risk infringing joint relief, as if a little linger, the composition will be difficult to remove from the surface of the tiles.To clear the need to stock two rags - dry and wet.