Corner shelves for the bathroom .Doing their own hands on the photo .

Preparation work: marking a corner shelf,

tools If you do not want to mess with the manufacture of a corner shelf for the bathroom, then, of course, you can buy it in the store.On the other hand his creation can be proud to show visitors and it will cost less, and still it will be a unique exclusive.So, what we will need to work:

• MDF;
• jigsaw;
• milling machine;
• drill with a set of drill bits;
• rope and a pencil;
• level;
• metal ruler;
• screws;
• brackets;
• acrylic paint and a brush.

1. Getting markup MDF.Buy a full plate is not necessary, because our regiment would not be large.You can even beg in the shop illiquid pieces of material can be give even free.Next, we need to know the dimensions of the sheet.Measured from the angle of the wall to the desired depth of the bottom shelf, multiply the resulting number by 2 and plyusuem another 5 cm, designed for cutting corners.

1. Plate mark up with a rope and a pencil.Put a sheet of MDF on the table, in the center of the plate pinned the button end of the rope, the other end of which is already attached pencil.Then act on the principle of a compass, rope pulled tight, outline the circle.The length of the cord from the pencil button to expect based on the radius of the circle.

1. divide the circle into 4 sectors, otcherchivaem metal ruler.We work precisely - the shelf should be the same size, otherwise then have a long and tedious to adjust them.

Cutting and assembling parts corner shelves

Once you are fully confident in the accuracy of marking, beginning to cut jigsaw pieces.Hand hacksaw not a straight edge, and the regiment will look sloppy.

1. drafted first cut out the circle.We carry a tool strictly delineated by line without the slightest deviation.Do not worry if there are small chips - at home on the low-power jig saw is inevitable.A perfect edge can be obtained only at high speed saws.
2. Next sawn circle into 4 pieces, cut corners (see note 5).It is essential that this environment was fixed bar on which are mounted all the shelves.

start assembly.Please do rough assembly to mark the holes for the screws and drill them.Putting all the elements of shelves, sadim on PVA glue and screwed for extra strength.Always check the evenness of the assembly level.

bringing together the elements of the shelves, side cover, it's time to think about how to decorate a shelf so that with her anything not permanently dropped.You can make bumpers, distinctive railing.The final touch - our masterpiece paint with acrylic paint to match the entire interior of a bathroom.

Well, now a corner shelf can be hung on the wall on brackets.We hope you have long prepared holes in the wall and hammered dowels, which will hold pride of your skill.

This wooden shelf really transform your bathroom, soften the angles, will make a much more functional, save space, which is never enough.Call guests and show off your creation.