Manual concrete mixer as a way to save money in the construction

Manual concrete mixer: buy or make your own hands?

Concrete mixer with manual transmission is considered to be no less popular than its counterparts automated.The cost of such equipment is much lower, which directly affects the demand of the construction market. Important! This tool can be a great helper when building a house from scratch, because for the device does not require a connection to the mains.

Modern craftsmen decided to save not only on the motor for the machine, but also its cost.In other words, Sophisticated builders decided to make a concrete mixer by its own efforts.Needless to repeat their experience?Definitely worth it, because the process of making this unit is surprisingly simple.

Materials for

apparatus Mechanical concrete mixer has a fairly simple design that can be repeated without the costs of this business a lot of time and money.It consists of such design:

• Ambulatory frame;
• Tanks for mixing components of the solution;
• Mechanical Crank capacity.

Those construction materials that will be required to recreate these components can be found on the construction site.For the manufacture of the mobile frame required metal area, the size of which must be as close as possible to the 50h59h3mm.In addition to the mixer can be easily moved, it must be equipped with two wheels.To do this, you can use any wheels with rubber tires.

now move on to the container to mix the concrete solution.The easiest option is to use an iron barrel, which capacity is 250 liters.This barrel can find or buy, because its cost is quite low.The handle, which will rotate the finished container is made from a metal rod of 12 mm in thickness.

Important!The focus throughout the frame structure to be tough and reliable, so that the total weight of the machine and a concrete solution has not bent the thrust rod.

Procedure for assembly tool

In order to produce high-quality mechanical mixer, you must adhere to the following course of action:

1. Made frame work of the metal angle.With the welding apparatus are made all the individual frame parts, to be similar to the two triangles, connected at the bottom.
2. is prepared barrel.Inside it is necessary by means of electric welding to fix at least three blades, which will mix the concrete mortar.
3. Secure the barrel on the frame in such a way that when filling its components it is not overturned solution.
4. At the bottom of the barrel prepared weld the handle that will be used for stirring the solution.

All homemade mechanical concrete mixer ready.You can fill it with water to check the tightness of the bottom, and in the case of a leak make substandard place.