How to use the screwdriver - Novice

screwdriver Construction - briefly about

instrument scheme presented tool can be mains and battery, and the type of work release drill-screwdriver, a cordless screwdriver, wrench and screwdriver.All of these tools have the same working principle, but perform different functions.

If an ordinary screwdriver works only with fastenings, then drill holes can also be drilled.Wrench for loosening or tightening bolts and nuts.Cordless screwdriver has a bit of a cruciform shape.According to this power device it is weak.

work without submission tool is quite difficult, especially if you have a large number of screws to tighten.Construction of the ceiling, fixed insulation or drywall to the surface, and many other things - that's why we need a screwdriver.

How to work screwdriver - stage

adjustment screwdriver design is quite simple.The plastic case is fastened the motor and gears, which drive the bit.Bits located at the end of the device.The main body is also present diode backlight, speed switches and the direction of motion, the controller torque switch is turned on.

The principle of the screwdriver is also very simple.By means of the motor through a gearbox driven by the shaft with the chuck, wherein this nozzle is fixed necessary.Now that you know what's inside your screwdriver, you can learn how to use it.First you need to ensure safe working conditions.It is also advisable to check whether the battery is charged well.If everything is OK, you can start to work.

Before working screwdriver, insert the desired attachment into it.It is selected in accordance with the size of the cap screw or screws.To this must be removed from the cartridge and coupling device and inserted into the magnetic bit holder, which is then inserted into the device and fixed therein.

Now you can adjust the speed of the bits.For this purpose, a special control device is provided.It is advisable to carry out this step before you start the tool operation.To know how to work screwdriver, you first need to understand the change in the direction of rotation of the spindle, which also has its own switch.

With the cartridge is regulated by the depth of screwdriving.From time to time it will be necessary to change the magnetic holder.To do this, you need to remove it by removing the first cartridge with a screwdriver with clutch, replace it with another type of holder of another type, and re-install all the elements in place.

How to use the screwdriver - the accuracy and safety of

After the above settings, you can start using the tool.To do this, the battery is connected to the device, and performed the necessary work.Knowing how to properly use the screwdriver, it is possible to avoid undesirable effects when handling the device that will extend the trouble-free service.

You can not adjust the frequency and direction of rotation of the nozzle when the machine is turned on and working.Protect the device from moisture inside it.The room in which the device will be used, should be well lit, and the electric power network - stable, without changes.

Do not touch the device to grounded objects, otherwise the user can strike shock.Do not use the device continuously for a long time, otherwise it will burn.Work is desirable only with a working device and protective clothing.