What should be the chimney unit in the bath , or a private house ?

Quite often today, the question arises, what should be the flues unit in the bath, or a private house, and this is due primarily to the fact that people want to live in a country cottage in complete comfort.

Meanwhile chimney is an essential component of the heating system and the whole structure of how it will be arranged in many ways depends on the temperature in the house during the winter.

Today we can build a chimney out of different building materials, and each will have its pros and cons.

Thanks to him, will provide the necessary removal of harmful combustion products, provide the required traction, which is necessary to ensure that in the oven incoming fresh air.

With the need to equip the chimney in the bath, or the private house building will face a host of ordinary wood burning oven, and the owners of the gas or solid fuel boilers.

Of course, for each type of heating device fits a certain type of chimneys, but their principle of operation and the device are similar.

most widely chimneys made of brick or stainless steel, but in recent years is gaining popularity so-called sandwich chimneys that are in no way inferior to the more traditional.

Types, types of chimneys

device furnace chimney in the bath, in a private house can be divided into externalor internal.

In addition, the furnace chimney is not much different in their construction from those intended for fireplaces.

there are differences when settling tube for gas equipment, in which case it can be made of stainless steel, as well as being coaxial and located in the wall, and not be placed on the roof.

In turn the furnace chimney, which is intended for fireplaces should be vertical door version and go through the roof.

material for the manufacture of pipes a variety of components can serve as a bath and a private home.Thus, it can be assembled from bricks, sandwich pipes, ceramics as well as stainless steel.

Photo:

most common now for furnaces in the bath or home use of chimneys of brick and sandwich pipes.

At the same time the flue gas at the boiler, as a rule, collect coaxial with the output in the wall, as well as stainless steel.

Regardless of the type of material used and, tube device must be made so as to provide effective diversion any harmful products which are formed by the combustion of fuel used.

Furnace chimney of sandwich pipes, bricks, stainless steel or coaxial with the output of the pipe through the wall must withstand high temperatures and be resistant to moisture.

In addition, it should not deform and collapse under the influence of various aggressive components such as sulfuric acid.

Prerequisite chimney for the stove and the fireplace in a private home, in the bath, as well as for gas-fired boilers, is the availability of the necessary traction.

There are specially designed for different types of flues standards including coaxial, which must always be taken into account.

Particular attention should be paid to safety in the event that the device is planned chimney in a wooden house.

In this case, a chimney extending from the furnace to the roof, it is better to put special bricks of which possesses high fire resistance.

When choosing the material of the chimney, should first consider the type of heating equipment, which is installed in the house or room of bath.

So, for a gas boiler definitely better to choose a coaxial type, passing through the wall of the chimney, or be made of stainless steel.

for furnace of bath room or the house, as well as fireplaces can be expelled from the brick or make a sandwich pipes.In this case, it will pass through the roof.

also many other options to consider when choosing the material for the chimney.You will need to pay attention to the smoke gas temperature, the amount of generated condensate pressure.

Based on all these data, calculated the size of the orifice, as well as the thickness of the walls.

In any case, the device chimney must be carried out according to the rules and conform to generally accepted standards.

Video:

Mounting the chimney for the furnace

for furnace, which is located in the bathhouse room or house, it is best to make a brick chimney or type of sandwich pipes.

And in fact, and in another case it is necessary before starting to count the size of the orifice and outline the sequence of actions.

on arrangement of the pipe work must start from the bottom up, while strictly control the connection of each node in the event that he was going out of the pipes.

Attach the wall should be in a horizontal position in increments of two meters.At arrangement of steel chimney should consider its possible deformation at high temperatures.

With the passage of the pipe through the roof should make a small digression, which is then sealed and compacted.

In the case where the pipe will be made of brick, masonry its start with the top of the furnace.To start on a vertical surface of the furnace tube hacking spread.

In this case, the brickwork is done on the principle of the walls, however, used a cement-clay mortar.Every seam between the rows of bricks is embedded as carefully and tightly.

In addition, only one-piece stone should be used when working.

In a place where being built pipe will go through the roof, you should perform a tight waterproof butt space.

entire furnace chimney in the final stage should be finished with a suitable material.For these purposes, or otter suitable steel sheets which are capable of withstanding high temperatures.

In turn the furnace chimney sandwich pipe requires some preparatory work before the installation.

Since he will go through the ceiling joists, the entire space in this area should be carefully insulated, such as mineral wool.

To do this in a place through which the chimney will pass, perform layout and carefully make a hole size required.

Next, you already own isolation.Installation of sandwich pipes start from the bottom of the oven surface.

Each inner tube is inserted during installation into another assembly, in turn, sandwich the outer tube in the reverse order, that is put on top of the previous.

All places sandwich pipe joints must be carefully sealed with a special composition, which is capable of withstanding high temperatures.

furnace chimney also should be secured to the wall with a pitch of two meters.For ease of cleaning of the furnace chimney in use is recommended to make a special window.

At the end of the pipe work must be at a distance from the ridge on the roof not less than one and a half meters.

Video:

Mounting flue gas boiler under

If the house is planned installation of gas equipment, the flue gas boiler device has several significant differences from the chimney.

In the case where the stainless steel tube is mounted, it must have a vertical position and pass through the roof.

At arrangement coaxial chimney, which is used when a special double tube, its output must pass through the wall.

should also be the capacity in which the condensate will flow.

addition, all connections should be carried out so that the surface of the pipe had no defects and was not deformed.

also should provide and technological openings through which it will be possible to carry out cleaning of the inner surface of the pipe.

Chimney coaxial type is based on the principle of "pipe in pipe", one of which overlook the combustion products, and on the other it provides the necessary traction.

With his installation, in addition to themselves coaxial pipes, also require different adapters and tees, which can be purchased at specialty stores.

installation begins with fixing the pipe directly to the boiler.Sama pipe should rise upwards from the gas unit to a height of one and a half meters.

If necessary, a chimney can be extended through the use of a special tribe.Next, a hole in the wall is the required size, in which the outlet spout is attached firmly.

Pipe connections between them should be made with the use of clamps.

At the final stage of the work necessary to connect a pipe between the boiler and the outlet neck while leaving pipe must have a minimum slope, through which the inner space of the chimney will accumulate moisture.

Video:

Before installing the flue gas for stainless steel equipment must accurately determine the optimal size of the passage tube.

After that you should make the layout of the place, which will be the outlet and its contours to make a hole of appropriate dimensions.

The whole area near the ceiling, which will host the pipe must be carefully insulated, then you must set itself outlet.

is followed by a piece of stainless steel pipe to attach directly to the gas equipment.

Then proceed to assemble the chimney by bonding together parts of pipes.In this way, necessary to interconnect the outlet and the boiler itself.

For a more lasting connection structure of the pipes must also be attached to a wall.In addition, all joints should be treated with a special compound to maximize their tightness.

When constructing any type of chimney, it must pass through the roof surface is selected with reference to the slope of the roof itself.

Particular attention should be paid to the connection between all the pipes, and in addition to monitor carefully insulated contact surfaces of pipes and construction of the house.

When all the work is done correctly and in accordance with the technology, the device chimney and problems with its operation will not occur.