Mold in the bathroom : what means get rid of it , and how to remove black mold

Everyone at least once faced with mold, so that the right can itfind.Mold often appears just in the bathroom, because the conditions of the premises as possible favorable to its emergence and development.

Carriers mold act microspores, which move in the air.As for them favorable conditions arise, they are deposited on the walls and begin to actively proliferate.As a result, soon begin to appear black spots.

conditions that promote proliferation of microspores:

• high level of humidity - about 90-95%, as the evaporation of large amounts of water;
• insufficient sunlight, because they are great struggle with the spread of the fungus;
• poor ventilation , fresh air is weak;
• during the repair work is not carried out further processing walls or was executed poorly.

above conditions often occur in the bathroom, so the appearance of mold in the room bath is quite common.

When the mold is just beginning to appear on the ceiling or wall, you will see black spots, which then become spots,if no action is taken to control.Mould spoils the look of the bathroom.Over time, cladding and plaster will peel off.But this is not all harmful mold.

to mold never appeared in your house, you should follow some rules for prevention.Namely:

• The bathroom should be present towel rail , because it perfectly warms the air, resulting in lost moisture.
• Avoid frequently opening the door to the bathroom, to improve air circulation.You can also use exhaust fan for the bathroom.
• After taking bath procedures, you must use a dry cloth to make a rubbing of damp surfaces, special attention should be given to tiles and floor coverings.
• Most wipe the surfaces in the bathroom, so that condensate is not going to.Pay special attention to seams between ceramic tiles, gaps behind the sink, bathtub, shower.To prevent the occurrence of mold processing should be carried out using special antiseptics. can use different grout or mastic for joints between the tiles and the surface of the tile, so that less moisture was absorbed.
• not recommended to dry wet things in the bathroom, not to increase the level of humidity.
• necessary to monitor the serviceability of the water system, not to miss a small flow.

Often mold is formed in the bathroom, so you should regularly inspect the walls and ceiling, and do not forget about preventive work. If you only notice the first symptoms of mold, then immediately begin to fight with her. If the measures are not effective, then we should use strong chemicals act or act cardinal - to overhaul.

The main rule is that you should be regularly cleaning the bathroom, even if everything seems to be visually clean.It is necessary to wipe the tiles thoroughly clean the floor with the use of special detergents.

cleaning will help prevent mold or the first manifestation of an active get rid of the breeding spores.

If you start the breeding of mold, then it is very difficult to get rid of it.It may take even several years.Therefore, at an early stage of its manifestations should begin immediate struggle.

sign of mold is the formation of plaque, moreover, he is not from pollution, and has a unique color - black, gray, or marsh. Try it to the touch, and you'll define it or mold, as is characteristic for her softness and porosity.

If you still difficult to determine or plaque is caused by mold, then you should sniff.Smell spёrtogo and moist air can not be confused.There is a feeling as if they are in an old cheese cellar or basement.

Many people use traditional methods to combat mold, because they enjoyed a generation of people.To start a war with the active mold spores, you should first examine how severely affected the walls and ceiling.The use of special drugs to kill the fungus according to the instruction takes place in the following manner: a tool should be diluted in 10 liters of water, then put on the walls and a few hours dry.

More grandmother used bleach and vinegar that rid your home of mold.To date at any store household chemicals can be purchased means that in its composition was chlorine.First, the affected walls smeared with a special bleach, moreover the procedure is repeated several times.

Then after two or three hours pass before cleaning the wall of a dispute, using a rigid brush.

also very popular in the fight with the enemy uses industrial alcohol .He first applied to the wall, and three or four hours should be removed from the surface.

Many generations uses bluestone.It is applied by using a special brush, and a few hours, as well as in the previous embodiments, the solution is washed from the walls and they are dried.When using it you have to be very careful to act in accordance with safety regulations.

Recipes manufacturing solution for mold removal to ten liters of water.

you can cook one of the options:

• 1 kg of copper sulfate;
• 100 grams of copper sulfate and bleach containing chlorine;
• 500 grams of copper sulfate and 2 liters of vinegar;
• 1 liter of bleach, which includes chlorine.

More good eliminates mold with a special solution of boric acid, hydrogen peroxide, vinegar and water.Their number should be performed according to the ratio 1: 2: 2: 4.Silit to effect solution, it must be heated up to 50-70 degrees.

If mold has already struck vast areas of the bathroom facilities, the above-mentioned means will not help.It remains only one option - to bring down the wall to the brick to remove all of the affected material and clean.

Modern means to deal with mold are more effective, and the expected result is not long to wait.

• Chemicals special composition allows to get rid of mold at the first sign of it.First, use the sponge should remove black spots, and then apply the substance to the affected areas.In order to prevent re-infection, the procedure must be repeated several times.
• antiseptics powerful steps used in the last stage of microspores reproduction.They may be of various types: water soluble prepared oil based or mineral spirits.When selecting an antiseptic to be repelled by the material on which the fungus develops.However, major repairs should not be postponed.Better use of antiseptics on the bare walls, after removing the tiles, plaster or other coatings.
• procedure ionization and air sanitation will once and for all forget about mold.For her conduct caused specialist who operates in accordance with all safety regulations.This procedure will also help to get rid of rodents and insects.But its cost is quite large, so the services of professionals are turning in the very advanced cases.

Usually, the appearance of mold in the bathroom is characterized by an unpleasant smell of dampness. To get rid of the smell, you should remove the source of infection, namely, all of the materials, which have fungus spores.

If there was mold on the tiles, you can try to wash it and clean the fungus using special solutions.If you hit the floor covering, plaster or drywall, then nothing will help eliminate unpleasant smell under the mold.The only way will be to overhaul.

To a while to get rid of the smell mold, you need to frequently ventilate the bathroom, use of air fresheners.

very good remedy is baking soda, thanks to the excellent absorption of odors. recommended sprinkle it all pre-treated areas, and a few hours later cleaned up.Also, be aware that soda absorbs moisture and, therefore, it would be a good prevention of the emergence of the fungus.

Remember that it is better to follow the rules of prevention of mold than to carry on with her long struggle.But if there was mold in your bathroom, it can be easy to win, using folk or modern methods.