Decorative plaster on the walls with his own hands

Among the many types of wall finish decorative trim recently takes more and more popular due to the fact that such a finish looks particularly elegant, but if you do it yourself is cheap, compared with other types of finishes.In addition, the original performance makes this a very attractive finish.Site apartment repair on its own tells you how it is done.

In addition, decorative plaster the walls with his own hands has a number of advantages:

- No need to pay great attention to the preparation of the wall;

- Ability to mask existing defects;

- can be used on all surfaces, for use in decorating the walls of wood, use a mixture of ray-based solvents;

- After this finish does not remain joints and seams;

- Easy to use;

- Very durable, for years, you can not change anything;

- impervious to changes in temperature and fireproof;

- The walls can be washed using a detergent;

- Increased sound insulation and heat.

decorative finishes for walls are used as interior decorating, and outdoor.In addition, you can decorate not only the walls, but the ceiling.Produced this work with the help of a special composition with a grainy texture. The composition of this mixture is about the :

- Water based with a connecting part;

- Fillers from crumb granite, marble or quartz;

- Various additives that improve the quality of the mixture - preservatives, thickeners, preservatives.

When a person ignorant of the construction business comes into the room, where the decoration is made of decorative plaster, he did not immediately understand how it's done.In fact, so to make out the walls are not only high-profile experts, but also any person, if desired.

for decoration more suitable large empty walls of country houses, in apartments on the advice of the designers, the best manner to make out different niches or walls that have significant cracks.Their use in the kitchen is most convenient because of the fact that these walls do not absorb odors, and better protected from dirt.

It goes well with any other surfacing materials.Therefore, they can be used in a variety of design solutions.

Features decorative plaster surface is not limited to the creation of an unusual texture, using this method even different patterns can be done, colorful and multi-layered panels or pictures.If you do bad paint, the special stencils are sold in stores.Or you can use a variety of cut out cardboard figures.With them, you can create original murals, which are nowhere else to be.

Most often in houses and apartments used silicone plasters, they have a high permeability and better repel water and dirt.Such mixtures are marketed in finished form received, so they are easier to apply.

Surface preparation plaster

order.For decorative plaster was applied easily, it is best to prepare the wall, if the formerly walls were covered with wallpaper - they need to pull out, remove the old paint, then wash the entire surface with detergent.

Before working with a mixture of read the instructions carefully.If the composition is necessary to prepare, then follow all guidelines and instructions are available on the packaging.Manufacturers often recommend formulations applied to the surface of pretreated with a primer, which embeds the microcracks.If the surface is absorbent, the primer will prevent its absorption.Surfaces with metal parts, such as nails or pipe must be covered with a special protective structure, or some time later, rusty stain may appear on the surface of the plaster.Next, let us consider in detail how to apply a decorative plaster on the wall correctly.

Widget from SocialMart

If the application is made in the newly built building, it is enough to cover the surface of a conventional mortar.Only after that is required to dry the surface of well over 10 - 12 hours.All work is performed at a temperature no higher than 30 degrees but not less than 5 degrees.

technology of application of decorative plaster on the surface

work can be carried out by means of an embossed roller shpatelnogo knife, a special brush, bristles, broom, or simply using a brush.It all depends on the desired pattern, your skills and preferences.Optionally, you can use a special trowel - plastic rectangular spatula with a convenient handle.

Structural plaster , dub trowel or spatula, and the pellets, rolling, create intricate patterns.

textured plaster is applied with a stainless steel spatula, roller, or sprayed, then dub the surface.Thus, the Venetian plaster is manufactured with interesting patterns.

After applying plaster remains plastic and it can be given any shape.This can be done using a roller with a long nap, then smoothed with a spatula or a brush, in broad strokes, but the use of a special figure roller or trowel will make work more interesting.

Depending on what kind of pattern you want to get on the line due to the many layers of plaster will be applied.And the formation of the final pattern depends entirely on your imagination.But the work must always be carried out from the corners.From the first time plaster certainly does not lie evenly.Therefore, at first practice on a small area.Do not leave the jar open.Now look at the photo looks like a decorative plaster on the walls with his own hands:

boxes of plaster

To do this, prepare a sketch first.Then the image is applied to the prepared surface.Silhouettes of decorative elements should be on a path to glue masking tape.After applying the first layer of adhesive tape must be removed before the surface hardens.Then, after the top layer is dry, paste adhesive tape and its contours are starting to put the top layer of the remaining areas.

volumetric images are created by applying layers of plaster in extent.To produce more complex patterns applied overhead elements of cardboard or plywood.Now a few examples of the photo as a panel looks into the interior of the room.

Photos taken from the site Design Studio Ellen Tel'nykh.