Table for laptop with his hands

era of personal computers is now coming to an end.They were replaced by modern laptops, which is not inferior in power and functionality of the PC, and that's to use it much more convenient.But to keep the device on your lap while working - not the best option.This is inconvenient, and the laptop heats up because of this stronger.To learn how to not spend a lot of money and make a convenient table for the laptop's own hand, and we'll talk further.

In fact, the people working at the computer, the tools in the hands take quite rare, but these instructions you can actually make a beautiful and practical foldingtable for notebook even without any skills in working with wood.

choice of materials

Material wood

you need two wooden board with knots medium diameter.Excellent suitable for table pine.It is strong enough and at the same time easy.Future table can carry the girl or child without a problem.Dimensions of boards choose the size of the future table.For a small nakrovatnogo table you only have to shield the size 30h100 see. You, in fact, have to do only the legs and the table top, so much material do not need.Wooden panels is optional.It is suitable plywood or particleboard.It will be cheaper, but the product is less attractive visually.

Paint table

paint Select - a simple question.In store pick a color that will blend harmoniously with the interior of your room.Note that the color of the ink and the final result can vary significantly.We recommend to buy it in stores where there are samples of painted surfaces.It is more convenient to take a quick-drying paint, but it's not critical.

Getting Started.Sketch and his transfer to the tree

• To make a table for the laptop with your hands, you will need drawings.Naturally, the drawing - not the strength of many of his contemporaries, so get on the Internet drawing table in size and shape.They are now quite a lot and one can easily find the best option.
• Print sketch on large format printers and a simple pencil move on a wooden surface.You can even print a thumbnail, and with a ruler to place control points and connect them with lines by hand.But then there is little chance to miss, because of what shape the table is uneven.

Tip: better to not be lazy and make the pattern correct any convenient manner, after which the picture is already possible to carry on a tree.It is also better to take a longer range to less than tinker with the rearranged intermediate and labels.So it will be easier and faster.

sawing, painting and varnishing

• Sawing forms - one of the most difficult parts of the job.The best option - use an electric jigsaw.You can do manually, but you spend a lot more time and effort.And the result can be an order of magnitude worse.The main convenience jigsaw that can be cut and deploy a shield at the same time.This allows you to make smooth curves and straight angles, even without special skills of the woodwork.Do not hurry.Keep an eye if you do go on the line drawn by.It is better if you leave the line than to grab a piece of a larger than necessary.Refer to the drawing.He - your insurance.Therefore, a picture that you moved to the tree, must be identical to that on paper.For convenience, you can fix the sheet with a drawing on a wooden board with tape and cut through it already.So you will be sure that the correct figure.During sawing shield can be put into two kitchen stools, leaving a gap between them, which will go Sawing jigsaw.The preform thus can be conveniently rotated as needed.If you do not have enough experience, we recommend you start with the less visible parts.Countertop until later and start with the legs.They are not so visible "flaws" cutting.This also applies to drawing and painting.

• Sanding surface.Very good to have on hand-grinding machine.Pull on rotating shafts sandpaper and fix it.We must work carefully so as not to tear the fabric skin.Otherwise, you will either have to change it, or doshkurivat manually.It takes ten times more time.It is best to have several skins with different grain.Coarse sandpaper suitable to remove the major flaws during sawing and small - to make the surface perfectly smooth and pleasant to the touch.This wooden table Laptop is not only convenient, but also really beautiful in appearance.
• painting.It is best to apply paint in several layers.Many types of wood well absorb moisture, which is why the paint dries places shine.Most paints dry out for a couple hours, but it is better to leave the painted surfaces to dry for the night, so you better see if the walk on them brush again need.Sometimes, after the first drying paint is barely noticeable.Do not worry.Still have to repaint.Also, quite often after the first painting of a tree a little "bristles".It is hoped that as a result of varnish will override the stubble, but we recommend once again sanded surface of fine-grained sandpaper.Do not worry, endlessly repeating the procedure you do not have.During the second tree painting no longer absorb ink so actively.

Please note that when working with a brush, you need to drive only along the fiber.This makes sure that there are no stains.Start with a less conspicuous place and trained, proceed to the more responsible elements.Very good, if you use brushes of different sizes.You can do the same, but better to use different ends and surfaces.

• lacquering.To table Notebook Stand has become even more attractive in appearance, after drying it is recommended to open the varnish.An excellent option would be a matte clearcoat.But you can choose to shop.Popular today as gloss and semi-gloss finish.Apply the varnish should be the same self, as well as paint.Sam varnish is not absorbed into the wood, so the coating process is much faster and easier.But also to watch out for stains and lacquer applied must also be along the grain and not across it.

table assembly

In order to avoid mistakes, always provide a range of measurements.Take your time to recheck all several times.Fold and unfold the legs by bringing them to the point of attachment, but it is not screwing.Make sure that they really are stacked symmetrically and smoothly.When expose them correctly, make notes for yourself marker, pencil or put small notch with something sharp.Then you just have to screw the screws loop.The main thing - do not overdo it with the screws screwed a long, lest they climbed out of the countertop or legs.

If desired, you can even make the worktop recess at the cup, it will not be superfluous.To do this, the easiest way to drill a through hole of suitable diameter and paste to a plastic container, and then paint the same paint and varnishing.This table is ideal for those who like to lie comfortably in bed with a laptop and a cup of coffee.

Tip: if you want a table with a slope, the front legs can be slightly sawed on one level, but at close to you to fix the bar of the countertop to the laptop is not slid.

The main advantage of such a design table - the minimum dimensions in the folded position and low weight.If you are thinking about in order to make their own convertible table for a laptop, consider that functionality in a more complex design is not much more, but a lot of fuss.

In any case, now you know how to make a table for a laptop for just a couple of days.Regardless of the selected thumbnail creation process is almost identical.Usually it is only complicated by the amount of material used and the greater complexity of dyeing.This table will cost you 5-6 times cheaper than purchased, and the convenience and functionality is not inferior.You can take it with you to the cottage or on the nature and proud that we have created a great piece of furniture yourself.