Sheathing panels bathroom

Today, there are several options for bathroom decoration and is considered one of the best plating bath panels PVC.This method allows you to not only transform the interior, but also save a lot.To make your choice, you first need to consider the "strong" and "weak" side of PVC panels.This will tell on.In addition, in this article we will look at methods of securing these panels on the walls.

Benefits material

Option finishing bath panels can be called a very economical.The fact that they are relatively inexpensive.This is perhaps the most important of their advantage.The difference is felt especially when compared with the cost of finishing the walls of the bathroom tile.The difference in price there will be very substantial.

Of the advantages is also worth noting the fact that this material is easy to install.PVC panel without too much difficulty, fasten the wall any person who has at least some construction skills.Incidentally, the fact that the panels can be set for the bathroom to her almost every bathroom also is an advantage of this material.

As for the disadvantages, then there should be, first of all to note the bad environmental friendliness.In addition, the final appearance is still inferior to the same ceramic tile.Yet any kind of such panels less aesthetic.

How to choose a panel

Among the variety of PVC panels on the building materials market is to choose the appropriate option for your case, at times, difficult.With particular responsibility should be taken to the arrangement of the bathroom.One of the main rules in the choice - to color and pattern matched the rest of the design.

If room size is not very large, it is recommended to choose the wall panels for the bathroom light shades.This will expand it visually and make more three-dimensional.It is best to choose a panel of PVC in the bathroom, where there is as little ridges and patterns possible.The fact that the presence of recesses and bumps on the surface of the panels promotes accumulation of dirt and mildew.

Particular attention should be paid to the rigidity of the ribs.It is important to assess their quality characteristics.In addition, there will be more than, the strength of the material will be higher.These structural elements must be the correct form, not deformed, not curved.If any shortcomings are, it indicates a lack of quality material.Perhaps the rules of its storage and transportation have been violated.Next, inspect the surface material.A layer of color should be applied uniformly, without flaws.If there is a pattern, then it too should have a clear shape and boundaries, not spread and does not smear.

Before you buy PVC panels, it is recommended to carry out a simple test: connect the two of them together and see if the joint is noticeable - it almost has to be seen.wherein the bond strength should be sufficient.

Note that the front surface were not seen stiffeners.It is best to presence or absence of the defect find out by looking at the part of the panel at an acute angle.Also, check the back of the product.It should not be any foreign matter.This is considered an indication that the material is only made of high quality materials.

important point is the fact that the size of the panels must meet the standards.This can be checked using simple measuring instruments.Themselves dimensions of the product must be indicated on the packaging.

If you decide to coat the bathroom PVC panels, it is not necessary to save then.Generally, it is advisable to buy materials for repair only in the audited retail outlets where you can get a guarantee of quality of purchased goods.Cheap material, especially in lesser-known places, do not buy.It is possible - it is a cheap fake.However, the most expensive to buy panels unreasonable.After all, the price does not always reflect the quality of the material.

Acquire PVC panel is recommended to reserve.The fact that some of them to be clipped to set angles.So before you go to the store, you should take your measurements from all the walls, which will help calculate the right amount of material.In addition, the calculation should subtract the size of the door in the bathroom.Knowing the number and the price of one square.meters of material, you can roughly calculate their future conduct on the repair costs.Calculation example is shown below.

paneling bathroom: Materials and tools

Do not rush to buy materials for finishing.In order not to overpay and buy it as long as necessary, try to calculate the amount.To do this you need to find the bathroom area.

Dimensions panels you should also be aware of - they are standard.Knowing this, you can easily calculate how many panels will require repair.For example, if the size of the material are 25 to 270 cm (width and length, respectively), it is easy to know simply multiplying the area value.When the area of ​​the panel is designed and the bathroom area is known, it can calculate the required number of panels, dividing the bathroom area and a bar area easily.

Besides buying the material, should take care of the necessary instruments.So, you will need a screwdriver and a hacksaw to install the panels.When mounting is necessary to make holes.For this purpose, the drill need and better puncher.In addition, during the work you will need a builder's level and a stapler and a tape measure to take your measurements.There are two basic methods of mounting the panels - in the crate and liquid nails.If you choose the second option, you will need to purchase an additional liquid nails.

How to make bath panels: preparation

Preparation involves several stages:

1. The first thing to do is to free up room all unnecessary things.In addition, if the walls has an old tile, then it must also be removed.
2. Before mounting the panels on liquid nails, you need to align the walls.For this purpose, you can use putty or mortar.More does not hurt to sheathe walls moisture-resistant drywall sheets.
3. on small bumps spend time alignment is not necessary.The fact that the PVC panels themselves are sufficiently flexible and therefore can themselves to smooth irregularities on the walls.
4. walls in any case it is necessary to cover spetssostavami protecting from the appearance of the fungus.
5. If the panel is mounted on a crate, the first she put it.Incidentally, in this case, you do not need to align the walls, becausepanel adjacent to the already aligned with the level of the crate, instead of the wall.

How to install panels in the bathroom

We have stayed a little on such an important issue for finishing bathroom panels, as the need for alignment of the walls.In general, by themselves plastic panels have fairly important advantage - they allow you to hide the existing irregularities.But in some situations before mounting the panels, it is still required to carry out the alignment of the work surface.Such a case, for example, is the presence of large irregularities with a vertical drop of more than 9 mm.It does not get close to the same level to fix the panel without any additional work on the alignment.

It is said that there is no sense to make the wall perfectly smooth.It will be sufficient to remove the bumps themselves, and everything else will be hidden under the plastic panels.

is followed to determine the method of fixing panels.Here, typically use two options screws or glue.But note that if the panel put on the glue, they will be difficult to peel off the walls in the future.Landing on the adhesive though a reliable way, but not without flaws.For example, this embodiment requires time-consuming work such as preparing a solution and applying it to the wall.This shortage is not worn on the screws, which is also true for ceiling mounting in the bath of the panels.

General Rules finishing

Perhaps everyone wants to get a quality coating.To achieve this is actually easy.Suffice it to observe certain rules:

1. Thus, it is possible to install the panel only if the room temperature is at least 11 degrees.
2. Generally acquired panels are not recommended for use immediately after purchase.It is possible for a long time, they are in stock.Therefore, let them soak at least two days at room temperature, after which you can start working.
3. also worth knowing that the change in temperature at least 10 degrees leads to a small, but still a change in size of the material.Given this fact, it is necessary to provide for the ceiling and floor expansion joints for 3-4 mm.
4. If the bathroom has heating elements, the panels are installed in close proximity to them must be separated heat-reflective screen.

Mounting on plastic guides

This option is considered as the best.Slides are mounted horizontally on the wall at two locations.In the middle of the wall and the top almost to the ceiling.If desired, to enhance structural strength.It's enough to mount the rail with a smaller step.

now consider in more detail the steps for installation:

1. first on the walls with screws or dowels at three levels guides are mounted.When this is done, since the angle can be set themselves PVC panels.
2. With mounting rails are usually sold.It is through these first panel after trimming adjustment fastened in place.
3. Subsequent strips before fixing on the site should be inserted tightly in the end slats, previously established.This avoids a gap therebetween.In addition, it hides the presence of the fasteners.
4. In the same way all the other fixed panels.During this work, and the need to control the level of evenness of joints.This can be done using a spirit level.
5. the corners of the panels are cut according to the measurements made previously.The ends and gaps after installation hidden corners or edging.

Installing panels in the bathroom on the crate

As is known, in Vannes room is always an increased level of humidity.Therefore, wooden elements for the construction of the frame will not work here.It is necessary to give preference metalloprofilnoy or plastic construction.If you can not buy a water resistant material, it is allowed to use wood, pre-processed and colored protective structures.When the frame construction is necessary to follow some guidelines.Thus, the rack should be fixed at 500 mm.And they need to be installed so that they are positioned exactly perpendicular to the previously mounted panels.Details battens installed at the beginning or end wall which is subjected to the finishing bath plastic panels.

If there is unevenness on the wall during installation you need to control the level of crates.If potholes large enough, they can compensate for linings made of wood or plastic.

When you are finished with the installation of lathing, you can begin to install PVC panels.This is done in the following order:

1. first corner on the screws or stapler is secured the starting profile.This is where you want to start the installation.
2. In the lower right corner of the profile in the direction of the movement direction is set mounting shelf.The panels themselves are attached to the sheathing on the screws or staples.
3. All subsequent panels are mounted similarly.Combining the two strips together, watch carefully for the size of the joints.
4. panels must fit tightly to each other.Gaps between them should be.They also do not have to go to overlap.
5. Near the doorway trims should be fixed by special corners.The resulting joints can be hidden using skirting.
6. If individual panels form the joints, they should cover up any suitable sealant.If high quality panels and lath was installed smoothly, these joints should not occur.

As you can see, mount the panel in the bathroom - not very difficult, and also fast.

panels for the bathroom: photo

Bath panels: video