Installation of the plastic ceiling in the bathroom

Suspended ceiling made of plastic for bathroom is the best option for finishing of the premises.Quick installation and low cost of the materials make it the most popular form of decoration.In comparison with other PVC panels are not afraid of moisture materials, which is very important for the bathroom, they are easy to clean and for a long time retain their original appearance.Currently, plastic panels manufacturers offer products for every taste - from simple monochrome panels minimum width to wide with interesting pictures.Installing a suspended ceiling allows to hide all the communications that are in the room (electrical wiring, air ducts from the exhaust pipe or water supply).Due to the fact that the plastic ceiling does not transmit vapor and moisture of the primary overlap state can not worry.You can choose what fits the design of your bathroom from a variety of textures and patterns on plastic panels.

Unlike the oil paint or stretch ceiling, plastic is very easy to assemble and disassemble.The replacement of all ceiling coverage, you can easily do yourself.For information on how to mount the plastic ceiling in the bathroom with their hands - on.

Types of plastic profiles for plastic ceiling mount bath

For installation of plastic panels as the ceiling and on the wall using the following profiles:

• Starter profile.It is designed to hide the ends of the panels.Fastened it on the perimeter.
• F-profile.It is required for a smooth transition from the wall-fitting plastic, the wall that is not closed.
• H-profile.Designed to connect the panels and to increase their length.It is used when the height or width of the room is too large to cover one whole panel.
• plastic corners.They are used to close the ends of the panels in the external and internal corners.
• Plastic ceiling moldings.It is used for the noble decoration of the plastic ceiling.In fact, it is no different from the starting profile.
• Universal plastic corner.He pasted on any angle, however, is not quite beautiful appearance.

Selection of materials

to carry out work on the installation of the plastic ceiling will need the following materials:

• plastic panels.If you choose you must pay close attention to their quality.They must be smooth, plain.Cheap plastic has one not very nice feature - it is illuminated by light from the spotlights, spoiling the whole picture of the repair.Therefore it is better not to sell too cheap and buy high-quality material than "enjoy" wasted time.
• profile metal guide (UD).The amount of this material depends on the size of the bathroom.It will be installed on the perimeter of the room.Accordingly, the amount will be equal to the sum of the lengths of all the walls of a bathroom.
• profile metal ceiling (CD).It is designed for mounting a ceiling battens.This profile is set perpendicular.For reliable fastening of plastic to the ceiling and to prevent its deflection, this step during the installation profile must not be more than 0.5 m. Depending on this parameter, it is possible to calculate the required amount of material.
• Be careful when selecting a profile.It is necessary to buy only high-quality galvanized, so they do not rust from the high humidity.
• Brackets for fastening to the main ceiling profile overlap.They are installed in increments of no more than 0.7 m. Otherwise, the weight of the whole structure can sag profile.They are fixed to the ceiling with dowels quick installation.
• Screws for fixing profiles (so-called "seeds").
• Screws for mounting plastic panels to the profiles.
• Start plastic panel or ceiling moldings.
• dowel quick installation.
• plastic panels.

From instrument clearly needed:

• Hammer or percussion drill.
• screwdriver.
• Jigsaw.
• level, tape measure, pencil, knife.

Installing plastic ceiling with his hands.Preparing for installation

Before installing, you must make sure the installation scheme.It helps to calculate the amount of materials and prioritize work.Usually ceiling installation begin at the lined walls, that is, after the walls of the bathroom tile is laid.

two methods can be used to fix the guide profile: wall mount or mounting on the tile.The second method is most preferred because when there is no risk of damaging the tiles when drilled individually.Keep in mind that, if you will fall perekalennaya tile, it can break when the hole Drill.When using the first method, you must remember that when mounting on the wall over the next tile decreases the width of the guide profile, making it impossible to mount the starting ceiling moldings.Because of this situation, there is an easy way out, "build" a wall on the top row of tiles with the help of plaster.The process is not too complicated.To do this you will need a plaster, plastic spatula (metal is not desirable to use, so as not to spoil the surface of the tile), masking tape.They are sealed with the top of the tile, so as not to stain the plaster tile seams.

First glued tape tile, then gently leveled plaster wall under the tile level.Installation guide profile can be started after a completely dry plaster.Typically, it is the next day.Profile fastened with dowels quick installation.If the tiles are laid properly, it can serve as a target level for the installation profile.It is fixed around the perimeter of seating one behind the other in the corners.

Mounting batten plastic ceiling in the bathroom

Work procedure:

1. After the installation of the bypass profile, you can start the installation batten.For this CD extensive profiles to be used.Plant them in the flow profile, mounted perpendicular to the plastic panels.Attaches to bypass cross-sections using small screws (seeds).It is better not to save and install 2 pcs.per connection.Installation cross sections, mark the place on the ceiling mount fixtures future to become a profile at the required distance.
2. Once the crate is assembled, the transverse profiles using suspensions should be attached to the main soffit.If the ceiling is lowered to the low height, the standard brackets should suffice.Otherwise, you must use special hangers.
3. Fasten these brackets to the ceiling with dowels rapid installation and to the profiles of the same seed.When attaching the transverse profiles, their position must be monitored via the level.

This frame installation is complete, you can install a plastic ceiling in the bathroom.

Mounting plastic ceiling in the bathroom

Work procedure:

1. first step in the production of works will start installation of plastic moldings.It attaches it to the bypass profile with screws for metal with a press washer.In the corners of the room, you can cut the plinth at 45 ° using stusel, however, it is much safer to simply insert them into each other, cut diagonally and fasten with screws.
2. Before starting the installation of plastic ceiling in the bathroom sure to connect (but not in any way do not connect) wiring lighting at the ends of the wires, set the terminals.Secure the wiring to the profiles or suspensions using plastic clamps.
3. Now you can punt panel.Before starting work, remove the panels with plastic wrap.This is a very common mistake, especially among those who do so for the first time.
4. Cut the panel must be slightly shorter than the width of the room, about 4-5 mm.The panel must be cut or a jigsaw with a fine tiled or hacksaw, with mandatory treatment space cut fine sandpaper.
5. When the panel is ready to begin installation.The first profile is put into the narrow end.The panel is then bent a little and the plant wide.
6. to slightly push the panel for the profile of the plant, you can use a spatula, but it should be done carefully so as not to spoil the plastic.
7. Once the panel is inserted into the profile of the front and sides, its rear end is fastened with screws to the transverse profiles.Now the role of the home, which will be inserted subsequent panel will play the previous one.
8. Then moving on to the scheme.In the place where you plan to install fixtures in a panel necessary to make cuts.They do a special crown or a simple knife.It is more convenient to make this work before installing the panel, you make it "in place".
9. The greatest difficulty in installing the plastic ceiling installation is the last panel.Naturally, if the room height is not a multiple of the size of the panel, it will need to be cut lengthwise.This can be done with a knife.The width of the last panel should be slightly less than the distance from the penultimate stop before starting the ceiling moldings.
10. First we start the last panel in the plinth, and then use an ordinary adhesive tape, glued to its surface, serve it in the direction of the penultimate and snap lock.
11. That's all, now it is necessary to install light fixtures and ceiling plastic rack for the bathroom ready.

plastic ceiling in the bathroom: Video