Build Daily

Decoration Of Premises, Renovation Of Apartments

August 12, 2017 18:07

Glass partitions for bath : on manufacturing instruction

Thanks to the tireless work of interior designers today can be seen tremendous variety of options for bathroom design.It contributes to this the fact that fundamentally changes the approach to the use of finishing materials.A good example of this is the use of glass - if earlier because it did just shelves and decorative elements, but today a bathtub with a glass partition becomes commonplace.Practical and stylish innovation has pleased many, so today's article will be devoted to the creation of a glass partition in the bathroom with their hands.

Content

  • Appointment glass partition
  • Classification partitions
  • manufacturing technology
    • partition of glass bricks
    • baffle of sheet glass
  • Glass partitions for bath: photo

Appointment glasspartitions

The interior of a modern bathroom can often find items that previously were considered unacceptable in this room.In this particular room it was always made to give priority to durable and functional materials - tiles, porcelain and stainless steel.But glass is also not afraid of no water, no wear and tear, and with proper manufacturing technology becomes solid as a rock.

glass partition in the bathroom - it is an original and stylish solution that will not only transform the interior visually, but will take on a number of functional loads.Why is the partition of the glass, can only be said by the customer, but we will look at the role that this can play a part in the interior of the bathroom.

1

Assigning a glass partition in the bathroom:

  1. decorative function - of course, the glass as separating element looks unusual and beautiful, especially if it is applied drawing, stained glass, or the surface of a relief.If you decide to build an apartment, say, in the oriental style, in the room you put a barrier of bamboo.In a constantly damp bath such obstruction will last a long time, so the alternative is to install a glass partition with a light stylistic painting - hieroglyphs, crane, sun or the same bamboo.
  2. division into the functional zones - septum from glass, unlike brick or plasterboard, does not overload the space, leaving it light and airy.At the same time it is a real barrier that separates the zones, for example, a shower on the lavatory, if adjacent bathroom.If the bathroom is a washing machine, dryer and ironing board, the "clothesline" zone can be gently isolate from the rest of the room, using the space efficiently.
    eleven
  3. Masking feature - Bathroom partitions made of glass will serve as an effective disguise, if, for example, from the wall of the riser pipe sticking out unsightly and they can not be hidden.Then, on a partition, you can hang a beautiful lamp or attach to it a few glass shelves, turning the ordinary into the functional screen wall.In combination bathroom and did not do without such a partition, especially if more than one person lives in the apartment.In order not to bring discomfort to each other and improve the aesthetic appearance of the bathroom, put an opaque barrier between the toilet and shower.

Classification partitions

idea of ​​installing glass partitions in the bathroom there was a long time ago, so designers had plenty of time to come up with different kinds of designs.

Today there are several types of glass walls for the bathroom:

  1. Depending on the material used - it would seem, it is the glass and the glass in the bathroom, but no.There are walls of light-gage elements monolithic and stekloblochnye -. Made of thick double wall glass "bricks"Fine-leaved partitions are by web and frameless.Latest transparent and does not fit the space for visual distinction.They are often used as a door for the bathroom or shower.
  2. light transmission sposobnost- translucency of glass partitions depends on their decor.They are completely transparent, translucent and opaque totally opaque.It should be noted that for small spaces suitable transparent or translucent walls, as will be dark "push" and yet reduce the space visually more.
    I
  3. mobility - in terms of mobility can be distinguished stationary barriers and partitions transformers.The latter can be quickly assembled or dismantled to be moved to another location or completely removed.One of the most common mobile partitions is a glass sheet on the rollers, which can be moved on the closet type, overriding the right or left side of the room.
  4. Depending on the method of opening - there are walls without doors with fixed opening and thus, with doors (hinged, otezdnymi).Opening partitions in most cases used in showers and spacious bathrooms with toilets.
  5. Purpose - zoning of the room, masking or modified shower.
    10

only with the permission of, the lack of partitions in the fact that their use is recommended only in a rather spacious bathrooms, because if you try to install even a light transparent barrier in the closet ordinary Khrushchev, it will be at least uncomfortable.

manufacturing technology

As mentioned above, the monolithic glass partitions are made of solid fine-leaved glass and glass "bricks".Partition fine-leaved, despite its apparent fragility, made of durable tempered glass, which must break even try.Glass blocks and does virtually indestructible (at least, at home to break this barrier will not work).

2

partition of glass bricks

glass blocks is an element created from two glass plates, pressed under high pressure, between which left hermetically sealed cavity.Through this structure, resembling a thermos, glass is one of the most energy-efficient materials in the world.In the Soviet Union in the entrances of houses are often made of glass block windows, so the inside was always warm even in the coldest winters and cool - in the summer.Today, glass brick walls make the original flooring, countertops, bar tops, etc.We'll show you how to make this material barrier bath with his hands.

22

Before you get to work and go to the hardware store, make a drawing of the future partition, estimate, it takes glass block, select a color (or more colors).

Tools and materials required for the work:

  • glass blocks;
  • adhesive mortar;
  • grout (select to match to the glass blocks);
  • reinforcing tape (wire);
  • PVC tape;
  • stainless steel trowel;
  • rubber spatula;
  • crosses glass blocks for the correct size (from 1 to 16 cm or more);
  • knife-jamb;
  • sponge for washing dishes;
  • dowels;
  • plumb and level building.

3

Properly installed glass blocks for walls in the bathroom will serve at least 10 years, so carefully follow the instructions.

Make a wall of "transparent brick" is not difficult:

  1. Draw marks on the floor and the wall, which will be adjacent to the bulkhead.It is not necessary that it reaches up to the ceiling.You can make it a height of 1.5 m, and the top to put the pots with flowing curly flowers.Or make a little lower and orchids grow on the partition (if the bathroom has a large window and natural light is enough) - they just love the constant moisture and warmth.Marking must consist of 2 parallel lines separated by a distance equal to the width of the glass block.
  2. Check evenness of horizontal lines on the floor using a spirit level on the wall - with the help of a plumb.If the devices showed that the wall or the floor is uneven, they should be aligned, otherwise the glass blocks will stand crooked septum and does not last a long time.
  3. Any house with time shrinks, and that your partition is not affected (because she will stand for at least 10 years), it is necessary to provide protection.To do this, between the lines marking paste PVC tape, freeing the protective layer and smooth over the surface.
  4. Lay glass blocks should be at the corner where the floor is joined to the wall.Apply adhesive to the wall and bottom of the block layer of 2.5-3 cm and lightly press down "brick".Adjust the position with respect to marking, tapping him handle spatula.The protective film of glass blocks do not shoot until the end of the installation!
  5. After installing each unit, check its flatness using level.
  6. Place the entire bottom row in this way, promazyvaya bottom and sides of each block, and not forgetting to install between the strut crosses, so you get a smooth and beautiful stitches.
  7. Every two segments (vertical and horizontal) "to weave" reinforcing wire or tape.
    4
  8. 3-4 Stacked series, interrupt the day-to solution properly grasped.Please note that glass blocks weigh quite a lot, so the solution is in the lower ranks could "move out", if the top is too much weight.
  9. As part of the wall is ready, remove the excess mortar between the blocks using a knife-jamb or corner trowel.This should be done immediately, the solution is not frozen.Along with the cleaning pick out crosses slightly hooking them with a knife.
  10. At the end of the day you can start laying the next segment of the wall, and so on until the very end.
  11. When the wall is ready, you can start grouting.If you are afraid to make a mistake with the color, choose white grout - it always gives you a spectacular contrast.Spread the grouting solution to the consistency of thick cream and apply it to the voids between the glass blocks not strong pressing movements.For this job you will need a rubber spatula.
    5
  12. Unaccustomed you are unlikely to get perfectly aligned seams, but it's nothing to worry about.After drying the lubricated portions can be easily "Align" or sandpaper №2 №1.
  13. rinse excess grout with a damp sponge for washing dishes.
  14. Only now can remove the protective film from the glass block and enjoy the work done.

To better understand the process of making glass partitions of the blocks offer watch a video on the subject:

baffle of sheet glass

with stacking "blocks" more or less clear, but how to make a glass partition from a single sheet?This process is somewhat more complicated, but the effect is created entirely different.To make yourself a screen, you need to make a lot of calculations - the weight of glass, marking, profiles, fasteners, etc.As a rule, the beginner, not versed in the engineering works, this task seems daunting, so many people prefer to buy ready-made system.In fact, it is much easier to work, and you save on installation - to cope with the finished system will be able to either.

6

How to make a glass partition in the bathroom from a single sheet:

  1. Make marks on the walls, ceiling and floor.In this case, the baffle will reach the ceiling.
  2. Check the evenness of the markup with a plumb to the line on the ceiling and on the floor we were in the same plane, or partition is simply not rise in fixings.
  3. Set profile by screwing the bus along the lines of markup anchors.Under
  4. tires lay rubber pads to reduce pressure on the surface, to create noise insulation barrier and prevent the destruction of the walls of the shrinking house.
    7
  5. dowels fix on elbows tire setting 2 pcs.every meter.This is to ensure that the partition was not the most stable and blockages.
  6. Screw clamps Squares to not end up spinning.
    8
  7. Secure glass connectors with a hex wrench.First, set the blade in the lower connector, and then - in the top and the least - in the side.This work is best done together, and even better - three of them (the two hold the glass on each side, and the third guides).
  8. Adjust the height of the partition or adjustable feet pads and tighten the clamps until the end.For
  9. partitions into several sections to be installed in glass 3.1 cm apart and then fill the gap with sealant.
  10. Set laths, snapping on the one hand on the squares, on the other - on the clamps.Fit the end cap to the profile, if necessary.

Detailed video installation of partitions of sheet glass will help you to better understand the course of action:

Glass partitions for bath: photo

By tradition, at the end of the article suggest that you see how the glass partitions can transform the interior of the most common bathrooms.

13 14 15

illustrative example, when a glass dividing wall is a disguise for the washing machine:

12

19 17 16

instagram viewer