How to paint the molding

Current trends in the world of design and decoration of the home and develop rapidly in the sale appears more decorative materials.One of these was the molding (in translation from English - "molded part") - the bar bill, usually convex, which has a cross-section.The original purpose of this product was to protect the surface of the wall from destruction under the influence of gravity of furniture.Then use this element has found a wider range.

Application molding

Today molding functions are decorating the premises, zoning,and surface protection of various kinds of mechanical damage.Using this element, you can vary the door decoration, wall, ceiling, fireplace.In general, there are features such molding:

1. He is able to transform the interior, give the room a stylish and sophisticated look.
2. wall surface can be divided into separate sections Using this material.
3. applying molding, you can create a rectangular, square and round shapes.The space thus be divided into zones, each of which will have a definite purpose.For added effect, each section can be painted in a single color.
4. In addition, such a detail is able to mask the poor quality finish or unsightly elements of the interior.
5. Molding as plinths protect the finish, will complete the transition and make the room look more tidy.

Moldnigom also referred to as frames for mirrors, cornices, skirting boards, rails for paintings.Eaves may be different in width, reaching several tens of centimeters, but also have the most diverse shape.They are:

• stucco;
• convex;
• concave.

Applying such detail in the interior, you can visually change the dimensions of the room.Painted in the shade of the walls visually raise the ceiling cornice.If it is necessary to achieve the opposite effect, in one color must be cornice and ceiling, and the walls have a different palette.

use popularity baseboards made of wood and plastic.However, the use of wood molding is possible only if absolutely smooth walls.But the plastic product can be adapted to the shape of the surface.If the tile is indoors, while the best combination will be of similar material molding.Also using the molding can mask the joint between the window and the wall.The window becomes more complete and expressive look.Mostly thus trim the outside of the premises.

Effectively will look and doors framed by moldings.Direct its purpose in this case - to hide the joint between the wall and the door frame.In addition, the product also serves a decorative function.Choosing molding in this case need of the same material of construction of the door.

Molding photo:

A good solution would be to molding as decor.This product can replace the stucco.By virtue of its relatively high cost, interior decoration in a similar way not available to everyone.Furthermore, masters in the art, there are little.Using molding, can decorate a room stucco details for all tastes, as well as hide the irregularities of the walls, the asymmetry of the room, disguise pipes and risers.

Another original way of application of this element is to create a design highlight how falshokna.To do this on a wall pasted wallpapers, mounted on top of the glass, and then molding.The result is an imitation of the window with beautiful scenery.What is the cost to paint the molding in this case will depend entirely on the author's design ideas.

Materials for molding

To produce moldings using a wide variety of materials, including popular such as:

• marble;
• gypsum;
• metal;
• polystyrene;
• tree.

Each type of material has its own characteristics.Gypsum is a natural raw material, but we must note that it crumble and afraid of water.Also to install stucco of plaster have to turn to a specialist, which significantly affect the cost.

polyurethane and polystyrene - foam variety.The first consists of a virtually imperceptible granules, the second - from the more pronounced.These materials have the advantage in price, you can install them on their own.When you select any of the options you should pay attention to the fact that it does not crumble and had a uniform surface.Polyurethane is the most used material.It can be easily stained in any suitable under the shade of the interior space.

in the manufacture of molding is often used tree.The most popular breeds used to create decorative elements:

• poplar;
• alder;
• spruce;
• oak;
• mahogany;
• yew;
• maple.

Tree will create a classic aristocratic style, this kind of material is durable and fairly easy to process.But it has a high cost, and does not possess sufficient moisture resistance.

originality in the design of the room will make colored moldings.With their help it is possible to reproduce the structure of natural wood, and plant and floral motifs, to create a variety of geometric patterns.Correctly chosen color of a product favorably emphasize the design space.In addition, the molding of polyurethane paint is not difficult.

Molding, so he had an attractive appearance and good safety, it is necessary to paint.This prevents clogging of dirt in pores, and the product itself becomes easier to clean.If necessary, it will not be difficult to wash any detergent composition.Even if the desired color - white, paint the molding is still necessary.

Materials required for the process:

1. Paint for this product.
2. polyurethane moldings.
3. Decorative plaster.
4. primer based on acrylic.
5. brush and spatula small size.

Choosing paint

Before you paint the molding and choose the best coloring formulation, the following recommendations should be considered:

1. To handle such an element latex suit, latex, acrylic paint and mosaic.
2. can also use decorative plaster, the application of technology which has no differences from the paint application.
3. Do not use oily substances, for their drying takes a long time, they are ecologically clean and inferior to other types of decorative figures compositions.

step instructions for painting moldings

To create original and aesthetic design of the home, you need to prepare a sketch, attach molding and paint it according to specific requirements.Thus, the technique of this process is as follows:

1. At the first stage we select the required palette.The original hue of polyurethane products in the ceiling will have a gray color.If the desired color - white, in this case, the white paint should add a bit of yellow.It is also ideally will look like the product, colored paint with a small addition of color close to the shade of the walls.
2. Next sticking to the surface of the wall molding.Perform this should be already available in the decorative covering - wallpaper, paint, plaster.Otherwise polyurethane element will not hold.
3. For bonding is necessary to use two types of glue.The first is a special structure for mounting the product.He has the ability to penetrate well enough into the material and to ensure a firm connection.The second type is designed to handle the joints between the elements.
4. In the process it should be noted that the adhesive has a relatively strong molding properties, bonding takes place almost instantaneously.Then, in case of any error, the product is no longer possible to adjust the desired direction.
5. Once glued decorative elements, should pay attention to the joints.Please treat their second type of adhesive.Then the verge need sanding and putty, using a putty based on acrylic.At this stage of the process should pay special attention, because even small roughness will become visible after application.
6. Then apply a primer.Choose the material based on acrylic.This primer has the ability to penetrate deeply into the pores of the article.If we work with a porous material, such as polyurethane, this feature is quite relevant.Only when completely filled then paint a good lie down on the foundation.
7. Then, using a paint brush, start coloring molding.Learning how to paint polyurethane molding, pay attention to the thickness of the layer.During application should be applied to the dense layer of material, because in this case the surface becomes more relief.
8. At the final stage with a spatula or a small brush sizes cover the product decorative plaster.For fragments of polyurethane coating is the best option with the effect of gold or pearl.
9. also go up a special paint formulations for finishing.Their application will allow to simulate the surface of old wood, weathered stone, gold and so on.

use molding to provide an opportunity to issue an apartment or a house with minimal cost and get the maximum effect.Using this element, you can visually create an effect stucco palace, hide unsightly areas of the surface of the walls, visually "raise" the ceiling or on the contrary to make it lower.The range of use depends only on the imagination of the borders.

painting technology embossed finishing materials in the style of "dry brush" is shown in the video: