Shower Enclosures Polycarbonate : installation instructions

There is no better way to cool off on hot days, than take a shower.In the country for this purpose, can be put showers in polycarbonate.Why should I use this building material?Let's speak on.

material characteristics

Polycarbonate is a polymer plastic, with a unique texture, which is produced by extrusion of granules.This material production technology makes it possible to maintain unchanged its dimensions.It is possible to melt the type of plastic, and then you can give it a new form.Other benefits include the following:

1. Material can withstand temperature extremes from -35 to +110 degrees.
2. Polycarbonate has high plasticity, which allows you to create the structure of virtually any geometric shape.
3. material has a low weight.Therefore, it can easily work even one.
4. robust sound and heat insulation.
5. This is a very durable material, making it difficult to break, and it is able to withstand heavy loads.
6. This type of plastic due to resistance to cleaning agents and chemicals is easy to clean.
7. eco-friendly material.

How do you shower polycarbonate

Selecting placements

If you decide to install a shower in the area, the first thing you need to decide is the type of construction.So, you can build a simple outdoor shower with a conventional tank, and possibly make a more fundamental and complex building heated.Whatever the design was not selected, you need to rationally choose the location for the next shower stall.In order to do it correctly, there are some recommendations:

1. So, should choose a place protected from strong winds.
2. To avoid problems with how to take stock of water in the future, a place for the booth should be on the hill.
3. In addition to the shower stall area must be on the light as long as possible during the day.It is desirable that it is hidden from prying eyes.
4. addition, a place for a summer shower enclosure made of polycarbonate to be quite spacious.Still it is necessary to provide for the free supply of electricians.

Preparations

drain to drain water can be done in different ways: it may be deepening, drainage, compost pit or septic tank.Drainage and septic tank use is not recommended because of the bad smell that comes with time.When the optimal location for the shower stall is found, you can start designing the important nuances of construction.

To make things easier, it is recommended to make a pre-drawing of the shower stall, which you want to construct.The scheme must be designated principal dimensions and location of the buildings on your lot.Ready drawing, in particular, accelerate the construction of the frame, which will be attached polycarbonate panels and the tank for the shower.This design is necessary to make the weight calculation of the panels of the tank and the amount of water that can fit into it.

is recommended to use a pipe measuring 60 × 40 mm as a material for the frame.Intermediates for the soul to give polycarbonate can be made of smaller pipes.

frame elements can be:

1. vertical strut of 2.3 m - 6 pcs.
2. horizontal size of 1.5 m support - 6 pcs.
3. lateral horizontal support size of 1.2 m - 4 pieces.
4. Skew at 2.35 m support - 4 pcs.
5. Slanting supports 2.5 m - 2 pieces.

Selection Profile

profile, in fact, called the frame on which are mounted polycarbonate sheets.Depending on that the host wants to get up, as well as some other factors, various materials may be used to manufacture the profile:

1. This can be steel, which is highly resistant to corrosion and strength.
2. profile can be made of PVC, if the important practicality, low weight and sound.Furthermore, as the material can be used for profile and light weight, high ductility aluminum.This material is selected, if the durability of the carcass is important.
3. frame is often made of wood.This material provides great opportunities in terms of processing.He also environmentally friendly.
4. affordable substitute for natural materials for the profile is MDF.It is resistant to low temperatures and sunlight.

Stages of construction of the structure

of work stages:

1. After the frame of preparation, you can do the foundation, which is required to provide the drain.After that set the bar.The first should be to dig a support vertically into the ground to a depth of about 500 mm.This rack is desirable to consolidate the concrete.If the frame is made of wood, at the ends, reaching to the ground, should be applied special antiseptics that will prevent rotting.In addition, the wooden rack is recommended to wrap the roofing material.
2. When uprights are installed, you can do the horizontal.Vertical steps necessary to secure the support to horizontal.This is done in different ways.For example, this can be done by welding, when mounting bolts, corners, or use a special clutch.
3. To strengthen the structure in addition to the vertical and horizontal struts must also use oblique support.This will allow the shower with his own hands made of polycarbonate to be more resistant to wind and other weather phenomena.Moreover, it will withstand the weight of a tank filled with water.
4. Now we need to do the roof.In this case you need to carefully follow the instructions attached to the material.
5. The next step is to install the tank.It is usually located in the middle of the roof and thus its weight evenly distributed to all body support.Moreover, the lighter the frame should be smaller than the volume of the tank.It is desirable to secure it by means of welding or use for this purpose a special bracket.
6. for tank mountings must be provided in the ceiling structure.It is important that the overlap of a full tank can withstand the weight.In addition, the need to tightly link the slab and anchors embedded in the brickwork.
7. To reduce the time of heating water in the tank, it is possible for them to make of polyethylene strips and a simple structure, iesomething like a greenhouse.Thanks to what is possible to heat the water at 7-11 degrees.More water heater heats the water faster.
8. desirable to provide a float tank, in order to know the level of water therein.In addition, it helps to make fence warm water in the top.This allows the movement of water by heating cold liquid in the bottom of the tank.This is especially true in the last month of summer, or on cloudy days when the sun can not properly heat the tank.
9. As for the tank, it is best to use a flat model.The advantage of such containers is that the water is heated quickly.Moreover, they are usually more stable.Flat tank after installation to make homemade shower cabin made of polycarbonate is not much higher, so that souls will stand firmly on the ground.
10. Then you need to fasten the frame polycarbonate panels.The width should preferably be 85-170 mm.And the roof is better to purchase transparent and opaque panels for walls.When installing the sheets with the help of profiles and aluminum tape is required to completely isolate the air ducts.You can use a transparent sealant for this purpose.If air ducts are not insulated, then the surface will gradually change color and lose the look.

How to choose accessories

When creating a shower of polycarbonate important step is the selection of accessories.When installing the walls, in order to qualitatively carry out all the necessary work, the following additional materials are needed: fasteners, profiles, thermowashers, sealing tape and sealant.

Thermowashers serve not only for fastening and sealing components, as well as thermal expansion of the material.Sealing tape needed to protect the structure from the ends of the dust and moisture entering from the ambient environment, and this, in turn, increases its operating life.As for seals, their task is to ensure the tightness of all connections and the provision of material thermal expansion.

What determines the cost of construction

Prices polycarbonate partitions depend on several important parameters for the soul.In the calculation of the following parameters are taken:

1. required number of components.
2. design option.
3. magnitude booths.
4. complexity of manufacture and further editing.
5. type of material and the number of its layers.
6. use and the type of decoration.
7. quality and thickness of the facing sheets.

Due to the fact that the shower walls are usually made on the individual sizes, the cost for each event is usually normal.For example, if we ignore the top guide, the price of materials for the booth 1 sqm areaIt will be from about 2100 to 3200 rubles.Booth 2 sq.m.cost is already at the price of 2600-3950 rubles.If you plan to also install the guide, then the total cost must be added an amount equal to 135 rubles per square meter of material.

Operating Rules

One of the important advantages showers of polycarbonate is that they do not require any special care.Most pollutants are easily washed off with clean water jet.Nevertheless, there are still some guidelines for operation and maintenance.

1. So, do not rub hard panel with a cloth.The fact that this could cause scratches which, in turn, lead to degradation of material and consequently the integrity of the cabin.
2. If you want to use on any special tools, you must first make sure that they include no substances that can damage the panel of polycarbonate.This information is usually available on the packaging.

Showers polycarbonate today are the most practical, modern and profitable ways to create a place for taking a shower at their summer cottage.It is important that such a structure can be easily built by hand.To do this, follow the instructions and recommendations is sufficient.If done correctly, the souls will be able to serve you for many years.You can not mention any attractive appearance of the material, so showers can easily elevate a garden plot.