Ceramic tile for kitchen - what it is ?

to content

Requirements Facing kitchen tiles can be made of wall and floor material type.K wall imposed primarily aesthetic requirements, but should also have floor increased strength and safety of use.In this regard, floor tiles and wall thickness is always stronger.Since the kitchen - a room with an increased risk of injury, the flooring should be with a rough surface.In appearance, the tiles are:

• Glossy;
• Matt;
• glazed and unglazed.

For walls often used glazed and glazed tiles.It has a smooth, glossy surface and adheres to it more difficult soot and grease.At the same time, if contaminated it is fairly easy to wash.When choosing a facing material must take into account not only the appearance of the tiles, but the overall interior of the kitchen, and specifications.Pay attention to the following factors:

• Moisture.The material should be safely tolerate high humidity;
• Wear resistance - high resistance to abrasion;
• Thermal stability;
• Resistant to chemicals and mechanical stress.

Tip! For kitchen is recommended to choose light colored finish to the room seem more spacious.

Preparing walls

Decorating kitchen tiles - a process that can be performed independently.However, you must know how to stick the tiles in the kitchen.The first thing you need to prepare the wall before installation.To do this, removed all old paint or wallpaper, the walls stripped back to the original state.Next wall primer is processed by deep penetration, to provide better adhesion with filler.After that, the surface puttied to smooth condition and primed again.

Next is the markup for styling was neat rows.The first tile is glued in the corner of the wall near the floor, and it is drawn from the horizontal and vertical lines.The main thing - to put it exactly, without bias, so the rule of "look before you leap" is perfectly suited to this situation.It must be remembered that between the tiles to leave a gap of 2.5 mm, which in the future will be filled with grout.

Tip!For smooth masonry, use special plastic crosses, which will help to make straight rows.

tiles for the kitchen and laying

Consider how to glue the tiles in the kitchen.The first row is laid out so as to obtain a strictly horizontal line.laying procedure is quite simple.On the wall, a layer of adhesive, the area of ​​application should be more than tiles.Trowel to apply adhesive to the back of the tile.When kleite material made strictly adhere to the markup.

Then each tile of the new series is glued in strict proportion to the bottom row.To check the evenness, use long range.Correct irregularities can tap with a rubber hammer on the surface of the element distortions. Important!Dub can only light blows of a rubber hammer, otherwise it is likely to injure the material.

If the tiles should be laid out only in the work area, ie, at a height of about 80 centimeters from the floor, on the wall is necessary to fix the fence (rail or metal profiles for plasterboard structures).This is done in order to make it stay on than the first row.This is to avoid slipping to the complete curing of the adhesive composition.