Bunk bed with his hands

General points

primarily in the manufacture of the bed is necessary to determine the place where you put it.Note that on the other side, where there will be stairs to the dimensions you need to add another 45 millimeters.Be sure to decide the height of the second tier.Masters say that the second floor of the bed should not be too high.

materials bunk bed

to build their own hands a bunk bed you will need the following materials:

• board: 30 x 30, 18 x 140, 40 x 40 and 140 x 80 mm.If desired, the timber can be completely replaced with laminated chipboard.In this case, the construction process is much less time consuming.

• materials for foundations, which will be laid a mattress - 3 steel pipes (diameter select by eye), 2 sheets of plywood and screws 3.5 x 40 mm and glue.

In addition, you will need tools for primary processing bars in the workshop: hacksaw, level, screwdriver, tape measure, a metal detector and a milling machine.

process of making the bunk bed

1. At the initial stage it is necessary to take 50 mm bars and connect them with screws.Thus you will make two frames for the future of the bed. (Use only good reliable attachment. Remember that poorly secured parts of the structure can harm your health when you start using the product).
   
   
2. Whiteboard 150 x 20 mm screw to the end and one side of the frame.At the upper rim also set couch 200 x 20 mm.
3. legs of your bunk bed made of 50 mm boards.To obtain end L-shaped timber should connect two lengths.leg length should be equal to the height of the fence, which is located on the second floor.
4. Further it is necessary to drill a hole in the leg.It is through this hole will attach the second tier of the bed.
5. The next step is the profile rack attached to the wall.After this exhibit for the frame level.
6. now produce fencing bunk beds.Boards of 20 x 100 mm are mounted on stands of timber.
7. should take two boards to be used as guides for the manufacture of stairs.Steps mounted 6-mm bolts.
8. Now two frames laid plywood foxes and mattresses.Our bunk bed is ready!

Incidentally, such a structure can be disassembled easily if necessary.It is only necessary to unscrew all the screws and bolts.