Installation of the toilet with their own hands - delicate to be trusted

Mounting toilet - that we will see in stores?

And it will depend on the choice of circuit connecting the toilet to the sewer system. By way of installation they are floor and attachments.

squat toilet long been familiar to us, the representatives of this tribe has long occupied a place in our toilets.They differ in the way the actual layout of the toilet bowl and tank.Most popular - one-piece version, where the tank and bowl constitute an indivisible whole.These models are more expensive than the price, but it is more convenient and more compact in terms of comfort.Occasionally there are retro model, when the tank is mounted at the top, and the toilet is connected to the high riser.As is clear, these models are attached to the floor and are usually the direct release of water "on the floor".

mounted toilets - a modern fashion trend in the evolution of this type of plumbing.A distinctive feature of these toilets - it is the lack of attachment to the floor.This plumbing artfully mounted on the wall and is secured by means of the installation of the system.Installation of installations for toilet made using a special frame, which is firmly attached to the floor and walls.Many users find this unusual design and a concern, as it can handle the load.Manufacturers will ensure that this kind of load can withstand up to 400 kg.And believe it or check these numbers on their own experience - a purely personal matter.Connection to the sewer system based on the principle issue of water "into the wall."

Also, this plumbing and different types bowl:

1. lavatory with ledge, now this model is no longer as popular as before;
2. with funnel bowl, the most common model, very economically uses water from the discharge;
3. options, working on the "American" system, a rare model in our market, a feature is that the cup is filled with water, and this water is abruptly reset upon the occurrence of the relevant moment.

How to fix the toilet or avoid annoying errors

dealt in the structural features, we consider the characteristics of their installation.Let's start with the answer to the question - how to mount the toilet floor structure.

• Before starting the installation of a toilet bowl with your hands, you must mark the position of plumbers, given the length of the sewer pipe.
• Wear on release of the toilet sewer pipe, setting it to the desired location, the other end of the pipe to enter the sewer pipe.
• Secure your device on the floor, but at the same time screws do not tighten .

At this stage, the question often arises: how to fix the toilet right?There are two usual ways fastening: attachment directly to the floor and attachment to taffeta.In the first method, it is fixed on the tiled or cement floor with screws, screwed into dowels.

In the second method to tie mount board, which is called taffeta.It is made of highly durable wood, for example - oak.This board toilet and fixed.But there is a third way of fastening - on silicone sealant.In this manner, the bottom is covered with sealant and is attached to the floor.After it dries, the toilet firmly sticks to the floor.

This method is not officially recognized, so if you decide to stay on it, you do so at your own risk.

How to mount the toilet - check the work

When you are already consolidated, you should check the installation of the unit building level.If he does not comply, then the question of how to handle the toilet, there is a simple answer - insert the chips under the bed plate.After that, it's time to tighten the mounting screws.

Now dilute cement or tile adhesive and seal the gap between the floor and the plane toilet.Perform pressure test instrument.

When mounting is necessary to use these tools: screwdriver, builder's level, pencil, tape measure, tile adhesive and flexible corrugation.

How to connect the toilet - mounted design and its features

next step look at how to collect toilet hinged design.You must first apply markup mounting brackets.To do this, fasten the frame to the wall, align vertically adjust the height for installation.Now you can attach the frame purchased.

installation system at the top of the flexible hose supplied water to the cistern, and the bottom of the sewer issue.After that, the module is inserted santehpriborov mounting studs.And then the system frame sheathe water-resistant gypsum board, which is coated with tiles.

toilet hung on rods inserted just after finishing the wall located behind santehpriborov.At this stage, the question often arises: how to connect the toilet to the sewer and water systems?The answer is simple - the water inlet and the waste outlet with grease, then insert into the special cuffs on the installation module.After that, the stud screwed the nut and close decorative covers.

To install this type of need: wrenches, hammer, level, tape measure, pencil.If in addition to theoretical knowledge on how to fix the toilet, you need to and visualization of the process, the Internet has a huge number of clips on the topic "Installing the toilet: video tutorials."And good luck to you!