Accessories for PVC panels - you will need it at some point ?

PVC Panels - short of building materials

First, it must be said that the starting components, of which the wall is made plastics, no harmful to human health or the inclusion of any active substances.PVC panels are widely used for finishing work in the construction or repair of various surfaces.They are installed in offices, homes, halls of shopping centers, various halls, hospitals and so on. D.

plastic panels proved themselves perfectly as a universal finishing material in the construction of non-heated cottages. They are also well suited for the interior walls of garages and balconies lining.

PVC is a versatile polymer material, from which the water pipes, various pipes and linoleum.The most convincing evidence of its high environmental quality is the fact that from this material produced bottles for drinking water and disposable syringes use.

Fittings for PVC panels and tools for fixing

Wall panels made of PVC plastic mixture by using an extruder.Long sheets are cut into pieces by 2.5-6 meters and after checking vybrakovochnoy stained from organics.Further, they are coated with lacquer, which provides them with a protective coating.In addition, the protecting layer has antistatic properties - that's why the surface will never stick dust.

remainder of this article we will look at ways of installation PVC panels on the crate.This method does not require special knowledge performer: it can make almost anyone who knows how to handle the tool.Assembling the facing plates requires no surface preparation and makes it possible to lay a layer of insulating material panels.

From the Tools required:

• saw with fine teeth;
• hammer;
• stapler;
• fittings for PVC panels;
• screws;
• dowel-nails;
• electric drill;
• building level;
• roulette.

installation and the necessary accessories for PVC

panels Mounting panels begins with installing the wall sheathing.To her suit wooden slats, cross-section 2x2 cm. If the work is carried out in a humid environment, it is desirable to treat the crate antifungal solution (also instead of wooden parts can be used galvanized profile).Reiki is attached to the wall using dowels, nails at a distance of 0.5-0.6 m from one another.Then proceed to cover the installation.

beginning with clips attached to the corners of PVC panels.Installation is carried out from the corner of the room towards the door or window opening.

first sheet is put into the groove of the previously installed bracket.After that, with the help of a special stapler staples attached mounting plate for PVC panels.Sheep next sheet is inserted into the previous groove.Simultaneously, fixing shelves to the frame.Further assembly takes place in the same manner as clips for PVC panels are snapped into the profile groove and with the widest part of the panel is pressed pribivochnik.

As can be seen from the description, the installation process is quite simple.It is only necessary to deal with where and how to apply for PVC moldings panels.With proper skill in one day can easily be oblitsevat panels of medium size room wall.The result: perfectly smooth surface, and most importantly - without the expected in the repair of construction waste.