The battens paint inside the house - a few recommendations for the composition of the selection

The battens paint inside the house?

Sheathing lining to hide surface imperfections and give an aesthetically attractive appearance throughout the room.In addition, it is also an environmentally friendly material, a beneficial effect on the human body.However, the distinguishing feature of the tree is the need to process it.So long as it will retain its original appearance and performance.It is because often use various varnishes, impregnating paint.

You probably have a question - what structure is best used inside the house?If we talk about the spray lining, the suit Panels Yassya, Eurotex, Tikkurila.From paints can be called Pinotex (which acts as the stain), Aquatex (the Russian equivalent of Pinotex, only much cheaper).If you need further paint the balcony or loggia, and you are thinking over what is best to paint the battens in this case, you'll find all of the above mixture, plus Panels Yassya Arctic and Senezh Akvadekor.

How to paint bunk?

Before exercising coating lining the respective compositions, it is necessary to prepare the ground.If the surface of the paint is the past, then you need to see how well it is kept.With strong connection sufficient to wash the walls 2% ash composition (ie approximately 300 g diluted in a bucket of water).

subsequent application of paint to the substrate is not necessary, as was the previous layer.Further shpatljujut surface and coated with varnish to which you can add a certain amount of the pigment and the solvent.At the final stage is applied primer.

In the case where there is no ink under, it is cleaned of dust and dirt using special bleach.If they do not help, then apply stain lightening.Next compulsorily applied primer.Only then apply a thin layer of paint for lining.

Movement must be from the top down.According to the same site is not necessary to conduct a brush several times, first - the first layer, then - the second.Painting lining in places of joining with baseboards and window frames, made a small brush.

In some cases, when you need to paint the nitro small wooden or metal surfaces, the question arises - what cover the battens in this case?In this situation, you can use a spray or gloves .

Yes, that's right.For example, tsigeykovaya glove turned inside out with the fur worn on the wrist.Next, it is immersed in the paint surface and covering tubes, plates and so on.But before that it is important to treat them with vinegar, so to speak, to prepare for painting.At the last stage can be coated lining varnish.But this is, incidentally, can be done without painting.Luck is often applied to the wood surface and a protective role, preserving and emphasizing the natural color of the wood.

few tips

After the painting process is not always possible to wash hands.This can use a special solvent or conventional vegetable oil.It should be rubbed on the stained area of ​​the skin and wait a few minutes, then rinse with water abundantly.

By painting the recommendations are usually very much.For example, if the film appeared on a painted surface, the bank needs to drop a small piece of nylon and dip the brush through it.Also in the film does not appear if the surface of the paper, and put a piece of the top fill varnish.

In the case when it is necessary to painted surfaces of doors and windows and dried normally do not touch each other, they can be laid a conventional foil will prevent it from sticking together.After final drying, it can be removed.By the way, the same can be done with the floor when it is necessary to pass without leaving a trace.