Laying his hands or sandstone acquainted with secular nature of the technology

Few words about

sandstone Natural stone is much more pleasant to the eye than even the most beautiful, but the faux finish.Yes and no synthetic material can not be compared in strength with this kind of rocks - sandstone, which, in essence, is a compacted sand for thousands of years.

is not to say that the sandstone is the most solid rock, it does not occupy the highest positions on the Mohs scale (2 times weaker than diamond), but amenable to treatment.The color of the sandstone may be different, which makes it more attractive in the decoration of houses.

sandstone Stacking does not give any certain standards, each chooses the size of the stone and its color, even the type of masonry can be selected independently.Everyone will find what he is more to their liking: someone like large stones and the same, some prefer small stones or, in general, a combination of different sizes.sandstone paving technology as such is not available, standard of beauty does not exist.

Preparing materials for walls and finishing with sandstone

So you've decided to spend laying sandstone with your hands, then decide what you want to do, you need to do, and go to the construction market.Buying sandstone tiles which will be thin (10 mm), keep in mind that even though she should be well attached, for example, to the wall, but then on top it will also draw another tile.In this case, the fat will be more reliable.

continuing to discuss how the laying of sandstone, videos on the topic we should mention, for clarity in this matter will not be superfluous.Before putting on a sandstone wall, you need to be sure to nail it on a special metal mesh.Grid attach large washers with the holes through which they pass anchors for quick installation.

Laying sandstone slabs provides concrete walls instead of brick, as they quickly disintegrate.Adhesive mixture may be ordinary cement mortar with the addition of PVA glue.

How to pave the path sandstone?

not forget that this kind of material, so try to keep this identity, picking up stones to each other in texture and color when placing tracks in sandstone.Do not get involved in a sharp stone, as it will lose its natural look.When laying be sure to wash the joints formed between the stones.It is important to do it on the same day that the solution is not "grabbed".

performing paving sandstone, you need to remember one condition: the temperature should not drop below five degrees for a month.Otherwise, the tile will fly off.Basic requirements to work:

• Paving can be done on an ordinary mortar, which makes it different to other types of stones.
• Especially left rough stone wall gives the original form.
• stone thickness must be at least thirty millimeters.
• place where sandstone is laid, should be cleared of grass and leveled.
• Laying the stone, be sure to press down further it.

For greater strength suitable substrate of sand and gravel, which is poured a layer of smooth, compacted, and then the solution is placed on the stone itself.At the end of the work, always flush with water seams to clean from sand and cement track.