Grease for Bulgarians to work went like clockwork

General tips

For a good work grinders need lubricant that will not flow at high loads and long-term operation, and will be securely lubricated over its entire surface for the entire running time.It should also be environmentally friendly.Pay attention to the well-known and already proven producers of lubricants, such as Lubcon , Hammer , Makita , Hitachi .Experts advise if possible to choose the lubricant of the same firm, as your tool.

Tip!Experts do not recommend the use of materials such as grease and litol.

deciding what to grease grinders, pay attention to the materials on the basis of silicone or silicone oil.Such lubricants are ideal for tools that operate at speeds ranging from slow to high and under all load conditions.They are highly resistant to oxidation, corrosion protection, easily combined with the plastic and elastomer.As part of the present exclusively silicon and lithium thickener, which makes them safe from an environmental point of view.Retain consistency at temperatures from -50 to +190 degrees Celsius.

grease grinders and its accurate labeling

One of the most important elements of the grinder - a reducer.When using the tool it is very hot, because it was him going pinion rotation, which leads to strong heating.For these reasons, the gearbox casing is made of metal, because it fairly quickly removes heat.But a shell is not sufficient to cope with the high temperature, it plays an important role and the right of its lubrication.

Every expert on the question of what to lubricate the gearbox grinders, will respond that it is best to use a special lubricant for angle grinders.It is specifically designed for business and the environment in which the tool is used.This grease has a specific blue color.Good, high-quality lubricant for gear grinder has the following marking: MoS2 NLGI 2 ISOL-XBCHB 2 DIN 51825-KPF 2 K-20.The marking indicates:

• MoS2 - additive acts as molybdenum disulfide;
• NLGI 2 - the second class of viscosity;
• ISOL-XBCHB 2 - comply with ISO standards;
• DIN 51825-KPF 2 K-20 - the most important point, it means that the lubricant corresponds to the German standard DIN.
• 51825 indicates that the material meets the lubrication type K.

The price of such a mixture is very high, but there are cheaper grease with similar qualities: KPF 2 K-20, where:

• K - for plain bearings;
• P - with EP additives;
• F - with a solid carrier;
• 2 - corresponds to the consistency of NLGI;
• K - the maximum working temperature of 120 degrees Celsius;
• 20 - the minimum working temperature.

Note!The use of special lubricants for the LBM give maximum guarantee for safe operation.

on instruments to guarantee

Particular attention should be paid to lubrication Bulgarians that are under warranty.Alone this is not recommended, should entrust this work to specialized workshops.There are high-quality and original materials with the correct dose to be used.applying the mixture can be carried out properly in the home, which has a negative impact on the longevity of the tool.

Tip!In the specialized services it is recommended to take not only the Bulgarians under warranty, but also those who have already passed the warranty period.

various lithological and Solid oils for lubrication of bearings and gears are strictly prohibited.In addition, the opening of the case on the guarantee instruments will be cause for denial of service, and the use of "unauthorized" grease in general is a flagrant violation of the rules of operation of grinders.An exception can only be external components which must be processed according to the instructions on a regular basis.