Reed roof in modern huts in an urban area

reed roof - what is it?

Modern reed roof - an advanced technology processing the raw material plus the experience of using this type of roofing of many generations.Even centuries later, the installation has not changed, it does not need complicated devices or instruments.The main thing - a mastery of the roofer and the excellent quality of the raw material.

Asked the difference between straw roof from a reed, you can answer that fundamental difference does not exist.To date, the device roofing concept of "straw" - is not the stems of cereals, and dried and prepared for the installation of reed stalks.Therefore, speaking about the reed roof, meant straw, and vice versa.

suitable material for roofing are straw stalks of reeds and cane.Thanks to a special drying technology, and they are in a dried state are surprisingly flexible, opening up limitless possibilities and prospects for the creation of a unique roof design.

Due to the flexibility of such a straw, you can create the most complex roof variants.Due to the nature of this type of coating water drainage system is represented by a French drain (chain hanging vertically), and gutters are installed, but rarely.

roof of reeds - a variety of advantages

Technology laying thatched roof is such that the portion of the visible remains of the stem, which during the growth of the plant was in the water and almost does not rot.In addition, the reed roof is made from environmentally friendly natural material that does not cause allergies and does not contain harmful bacteria.

In addition, the roof of reeds will appreciate excellent resistance to extreme weather conditions, it is not afraid of cold, heat and rain, the thickness of the roof absorb the falling hail sounds thundering thunder and howling wind.Natural roofing material that is resistant to moisture, so that the roof does not swell and does not get wet.

Another important addition to the treasury of the merits of the roofing material is that this roof in the winter and in the summer the temperature remains stable.In winter, under a roof will be warm, and cool in summer.In addition, the ventilation of the attic space for installation of this type of roof is not required.

roof thickness of the reeds is about 30 cm, which is equivalent to the use of insulation thickness of about 15 cm. Accordingly, additional warming of a roof is not necessary thermal conductivity.And by the way, reed roof does not require heat and vapor barrier.When laying the roof and engaged professionals use with high-quality material, the roof of reeds will last more than 50 years.And, importantly, this roof can be repaired, if necessary.

Thatched roof - some more interesting facts

The only thing that is afraid of thatch roof - is a fire.To improve fire safety all the starting material is treated with impregnants, due to this risk of inflammation of the roof has become very small.The use of the treated material impregnant allows to secure this type of roof for a period of about 20 years, but the producers are advised during this period to check the condition of the coating every 7 years.

To prevent all the negative consequences of chimneys need to bring in the highest point of the structure, and inside the fireplace and chimney install metal mesh to reduce emitted sparks.

I would like to dispel another myth regarding living in such roofs rodents.Since rodents settle in crevices, holes, etc., the quality laid reed roof in them without an assistant.Straw roof fits so tightly that it is difficult to get there, and the processing of the material by special trains reduces the possibility of the roof gnaw.

Distinguish open and closed construction thatched roof.With an open design material is attached to the crate so that the inner layer of the roof is simultaneously the ceiling of the room.Such a design variant, typically used in public places for giving external effektnosti.The closed design is more simple to install, the material is attached to the plywood sheets are waterproof, which act as additional acoustic and waterproofing.

Reed roof - the basic rules of installation

thatched roof installation includes 4 stages.

1. Temporary fixation of reeds on the roof with the help of pegs, clamps or special bollards.During installation, these terminals must be moved along the reed bed.To lay the roof must be an average of about 25 of these pegs.In addition, during the fixing of the reed must promerivat roof depth.Lower construction consisting of waterproof plywood, fiberboard and other materials must be intact, smooth, clean, dry and solid.It is necessary to carry out quality insulation of chimneys, skylights, etc.
2. compression.If reed stands for lower structure, it must be compressed by about 50 mm depending on the wind load.This action is made in the outer side so that there are no gaps.Reed must be adjacent to the inner edge of the roof, and advocate for the clamp 15 cm. The clamp is made of galvanized steel wire.The first is located at a distance of 20 cm from the clamping plate, the second - 12 cm from the first and all following at a distance of about 30 cm
3. mount..All of these distances must be secured tightly clamps.And on the corner beams bundles of reeds sewn stainless steel wire with a pitch of 22 cm.
4. Installing ridge.Reed stacked so high that the distance from the ridge of not more than 5 cm. Under the ridge is necessary to lay a strip of mesh.To finish leveling cane, as well as its seal and give an accurate type, you must use a special bit.

roof of reeds will always attract the eyes of others and please the eye with their uniqueness and thanks to the unique properties of the natural material, its operation is much more pleasant and more profitable Many modern roofing materials.