How to connect the washing machine in the home ?

Location laundry

cancellations and ensures safe operation of the machine in the first place-correct installation.Because there are several options for placement of household appliances.

Standard method involves placing it in the bathroom, but in recent years this place has ceased to be axiomatic.And now even the kitchen and living room can become a haven for her, as often in the bathroom with a small area is simply not enough space.

Preparing to install a washing machine

Immediately after the determination of the place of installation and removal of the package, which includes removing the transport bolts, braces and throws, fasteners, proceed to installation.Special plugs are covered with all the holes.

All transit elements of the machine mounting, be sure to remove from the device, as due to their drum machine could be damaged and break up the state of stalemate.And obviously because you do not want to damage your brand new machine!

Sewerage for cars

There are certain features of the machine to connect to the drain:

1. For machines with non-return valve for the passage of water in one direction, you must install a restrictive level with a minimum and maximum value.Also available should be the outlet shlang.Na photo below shows how the look and restrictions necessary value.
2. Before you connect the washing machine and drain the system it is necessary to buy a siphon.Since the hose coming out of the machine is connected with the discharge of water from the sink, to avoid any possibility of leakage of fluid.
3. attach the drain hose to the sink rim, but reliability, security, and securing the complete absence of a leak on the floor it can not provide.
   

   Stationary draining - the best solution for connecting sewers.You will not need to worry about how the hose because fixed connection guarantees the reliability and safety of the compound.

4. hose must be positioned without kinks and be secured at a distance of 80 cm from the floor at the back of the machine.High-quality hose connection adapter provided with clamps.

Water washing machine

Wiring water supply system is implemented in the following order:
Connection uses hoses with a diameter of three quarters of an inch, which as far as possible choose longer and mounted together with rubber gaskets or cuffs.

Then before to connect the washing machine on its own, is to separate the valve:

1. Threading aqueduct.Installed fasteners and cut the threads, and then the valve is mounted, and after the first wash water overlap.
2. Installing protective mesh filter.He was prevented from entering the mechanical elements of the device drum.The filter is constantly cleaned.
   

   Connecting water pipe to the car only with valves and ball valves, which necessarily serve valves disconnecting device.A water supply used mixers and taps.

3. hose selection.You need to select the maximum length so that you can unscrew it before washing the mixer and connected to the filler neck of the machine.

Connecting devices through the mixer:

• The fastest way to connect water supply, but it is a temporary or even a trial.
• The machine is protected from leaks when it does not work, because in this time off the inlet hose.
• sure to align the location of the machine using the regulating feet, otherwise it may be disabled.

Electroset for washing machines

Driving electricity connection:

• tire thickness, which grounded the switchboard, is not less than 3 mm.
• is connected via a three-wire socket with phase zero and ground.
• Mandatory thorough insulation to ground.

device operability

There are certain parameters that must be checked before and during the first wash:

1. There should be no leakage.
2. rotation of the drum must!
3. tank for some time should be to gain the right amount of water.
4. Job drain after washing must be streamlined.
5. Spin also has to function.
6. There should be no extraneous sounds suspicious.
7. Water should be heated after 4-8 minutes after dialing.

Now that you know how to connect the washing machine on its own, in-first, get the instructions to your device, examine its characteristics, and start the installation with great care.