Varieties valves for radiators

Species cranes

The auxiliary heating systems are commonly used for adjusting valves radiators.In central heating systems use a different kind - ball.

In turn, both of these types are divided into subtypes.

regulating valves are:

1. With the thermal head.He has a head that performs temperature control function.They are placed in single-pipe and two-pipe heating systems.
2. Without thermal head (standard valve), which is free on the temperature scale handle, so fine-tuning with the help of impossible.

When choosing radiators for Bugatti taps such criteria must be considered:

• Place tap position.
• His purpose.

example, angle valves for radiators, as well as direct, used for manual regulation of water consumption in the radiator.

Features of ball valves on radiators

ball valves made from either brass or polypropylene.A locking mechanism it is a ball.Installation

polypropylene crane on heating radiator consists in that their joints, and then welded to the heating system by means of the welding coupling.

To open the ball valve, the regulator should be to turn to the left to close - to the right.In no event it is impossible to leave it uncovered.This can result in damage to the sealing ring, after which water leakage occurs from the stack.If leakage has occurred - the crane needs to be changed.

How to attach the radiator to the wall or floor

Most often, the installation of the heating system, the battery carried attachment to the wall.Batteries using components installed under the window to prevent the penetration of cold air into the room.

on concrete or brick battery of heavy metals can be hung, using standard plugs, but if the surface of wood or plaster, then you need to take care of special floor foundation.It was on the floor will be heavily loaded, and the wall mount at the same time only to maintain the battery vertically.

number of points fasteners depends on battery size.If the number of sections does not exceed 6, the brick or concrete surface sufficient to attach one bottom and two dowels on.

mount radiator to the floor is performed very rarely in those cases, if the wall is not a special niche or if the heat sink is attached to the wall, ruin the interior painting.

How do eyeliner pipes to radiators heating

Liner pipe is performed in several ways:

• Public method if the pipeline is laid is also open.
• output pipes from the floor to the bottom of the radiator.
• output pipes from the floor to the walls and shtorby their eyeliner to the top or bottom of the radiator.

Usually when choosing a method of the special role played by the aesthetic factor.

What price cranes for radiators?

average cost of the kit will be about 1,000 rubles.Ball valves from high-quality materials are expensive, their price can reach 3 thousand rubles.