Installation of sewer Rings

Key Features manholes

Drainage communications consist of components, each of which performs a specific function.This may be tubulars of different diameters and size, are connected to a large variety of fittings.One of the most important elements that completes the waste system is a cesspit.

First of all, it is necessary to list the types of structures of this type.It can be:

• Sight.With this type of devices can produce an audit sewage pipe-line and also to make repairs.
• Perepadnaya.Used in drainage lanes, where there are differences in the level of pipe laying.
• Rotary.It is used in ground drainage system, where there is to be a sharp turn pipe fittings.It prevents blockages.
• Filtration.Used for filtration of wastewater flow.
• Savings.Cesspit, which receives all the wastewater treatment products and their subsequent accumulation in it.

Materials of construction for data assenizatorskaya design, are quite diverse.It can be various kinds of building blocks such as cinder block or brick.Commutator wells can be made from polymers.Such devices are widely used in construction.So the installation of sewer rings is quite frequent in the installation of drainage collectors.

Concrete sewer rings can be used for different purposes on the farm.This material, after having covered, it is possible to use the mini-storage facilities for the different agricultural products.Also, such reinforced concrete structures, it is possible to make a small pool, or use as a shelter for animals.

mounting technology of reinforced concrete manhole rings

device assenizatorskaya collector using a ring of reinforced concrete is often a widespread phenomenon in the modern practice of construction of sewerage system.Installation of such a structure is relatively simple and requires less effort and cost, compared with the construction of similar buildings of brick or concrete filler.Installation of sewer rings as well assenizatorskaya requires a certain amount of action:

• Preparation sewer communications installation scheme and the calculation of work cost estimates.
• Preparation excavation, which includes digging a pit on a pre-detection parameters.
• After preparing the pit can proceed to the arrangement of the bottom of the well, which the device depends on the objectives pursued by construction.If the collector is cumulative, then the bottom layer should be put gravel, tamp it, and then pour the concrete.Home
• well installation begins with the installation of the first thorough rings.It must be put on a strong concrete.Then, after a pre-prepared holes, to hold the pipe.Slots should carefully paint over the sealant material.
• Further foundations ring one after the other set rings made of reinforced concrete, so that fixing the locks were in the same place.Formed in the connection gap between the rings must be carefully paint over the sealing solution.
• top of the whole structure is closed and covered with a concrete slab hatch.

Construction of concrete septic tank rings

Besides the usual drain the well of concrete rings possible to construct a more complex assenizatornoe device as a septic tank.The device septic tank of the material cost much less than purchase a plastic septic tank, and much easier to install than the aforesaid concrete.The circuit of this device may be a multiple tanks connected in series with each other.There may be two or three.As in a conventional septic tank, each from separate reservoirs performs a specific function.

• first filters out solid waste.
• second - more liquid.
• third - recycles waste through natural absorption or removal to another location.

Installing sewer Rings, in the case of the installation of a septic tank which is produced by the same technology as the collector.

Thus, the article described the basic characteristics of concrete rings, as well as the specifics of the installation of these manholes.