The scheme of installation of the channel air conditioner , advantages and features of the installation

On the need to maintain a constant indoor climate (not just residential), you can write endlessly.But how to achieve this?The known and widely used in household split systems have a significant disadvantage - limited range.In fact, they are working on one specific room.

Therefore, if the apartment more than one, then each should be installed the appropriate set of split systems with output of air ducts and electric / wire outside.As far as it is rational, is another question, but to ensure a comfortable temperature in the bedroom and in the living room and the kitchen at the same time, no other choice.Except for one thing - to put the channel air conditioning, installation scheme which we will consider.

A need air ducts, elements of their accession and intake grille (from the word "take").Extras (optional) - heater (water or electric), heat exchanger.Depending on the specific installation, and "wiring" channel and the corresponding selected product.

In principle, the term "channel" should be applied not to the air conditioning, but to the system as a whole.

Features channel conditioning

big plus use is considered to be the fact that while the system is a constant mixing of fresh (coming from outside) air in order, which is taken from the premises.

can be set when the premises Hinged ceiling.Hence, or even during the construction phase or during repair, and capital.This is due to a limitation in the application, as determined by the feasibility of the installation in the first place, high ceilings.

for typical apartments in high-rise buildings with a ceiling height of 2.5 m on average is unlikely to such systems are suitable, except that "an amateur".But it will have to do "constructing" artificial ceiling.In this regard, the owners of country (private) houses "easier".channel system devices can be installed in the roof space, for example.At least, unlike citizens have options.

Depending on the wiring diagram, the channel model can be used for forced ventilation (exhaust).For example, in the kitchen, in the bathroom.

installation diagrams

That is, in the plural, as the possibilities are limited only by the capacity of the device, which determines the length of the duct.Some embodiments premises constituent parts clearly visible (and do not require explanation) in the figures.

Operation system installation channel conditioning is not much different from the specificity of the usual installation of split systems.

cost

Her most noted as a lack of channel air conditioners.It is higher than for the conventional split system, about 1.8 - 3.2 times (depending on the complexity of the installation and model).In fact, preliminary calculations + installation "channels", the installation of lattices - all increase the final price.

But if you think about it all clear?

Indeed, self-install system can only host, which in this case professional.And how many are capable to mount even the simplest split systems?In addition, at least, that it will take - + long hammer drill to drill through walls.It is worth all of this is quite expensive, and the purchase does not make sense for a single use.So, still have to pay the masters of hired services.

useful information is more than enough.And to put or not to put the channel air conditioning system, is up to you, dear reader.