Wooden stairs with his hands

for apartments and houses to the second floor, as well as houses with attic or loft ladder is manufactured for lifting the second floor.The simplest and most affordable option, which is on the back to everyone - it is the production of wooden stairs with his hands.

Step by Step

1. To staircase made of wood has been successfully installed, you need tocalculate its slope, which can range from 25 to 40 degrees.

2. Construction of wooden stairs involves preliminary calculation of her steps.On the basis of the maximum distance between the steps 19 cm, the number of steps calculated adjustment structure.The width of the tread must be at least 25 cm.

3. Safe installation of wooden stairs requires that it be equipped with a handrail height of not less than 90 cm.

4. The site has a video on how to make a wooden ladderwith his own hands.You can see the steps and work sequences, and make sure to make it easy.The material applied to the instructions on the photo - pine.This tree has a beautiful, spectacular structure and easily processed.For string ladders used pine edged boards 400 mm wide and 40 mm thick.

5. Mark the space under the treads installation, a circular saw cuts made templates depth of 10 mm.Using a chisel choose between an array of board propylene ready bowstring mounted in working position.

side ropes are attached with screws to the floor using the screwdriver and galvanized metal parts.

6. From the board width of at least 250 mm circular saw cut stage.The thickness of the steps depends on the width of the span, but not less than 25 mm.

ends of the steps to a better connection with the bowstring processed by machine.

Connect stage and the string using wood glue, spreading the ends of steps and grooves in the string.

7. The assembly of wooden stairs in this case requires that it has contracted with galvanized rods screwed at the ends, which are wound on the nuts with large washers.

8. In the example shown, demonstrating the installation of wooden stairs, the distance to the wall allows to arrange different wooden shelves for things, and books that are appropriate for the design.

then set grind shelves.

In addition, you must install handrail for safety.By installing a rack, attach it to the two boards with a height relative to the upper levels of at least 90 cm.

9. handrail and ladder material itself is treated with sandpaper to avoid chipping, hooks and splinters.

ladder to be treated special primer from rotting and anti-fire, and then cover with a transparent varnish for parquet.

Materials and tools

to a wooden staircase, as in the photo, has been successfully made with your own hands, you will need the following materials: boards pine width of 400 and 250 mm, with a thickness of 40 to 25 mm, bars 50-50, gluecarpentry, paint and primer on wood, galvanized tie rods and screws, metal corners.Of the tools you will need: circular hand saw, screwdriver, brush, sand paper, clamps, chisels, grinder.

Videos manufacture of wooden stairs with his hands