A niche in the ceiling : installation instructions

in the field of contemporary art design, there are many opportunities and options for the transformation of the premises of all sizes and different layouts.One such option is a ceiling recess, with which you can easily disguise even hanging curtains.If you are interested in such a popular element of the decor - we offer more acquainted with the instructions for creating a niche in the ceiling.

Design ceiling niche

Design ceiling in the living room - it is no less important process than finishing the walls and floor, because sometimes the ceilings may be part of the general form of the room and its main focus.

Time does not stand still, refined and modern building technologies.Today it is becoming a forgotten past wallpapered ceiling.Whitewashing and tiles over the head as long ago lost its popularity.In place of the old, new ideas come, come to life creative design ideas and options with which you can make a beautiful ceiling, abound.The most common and durability are considered Tension and plasterboard ceilings on the right.

flexible in drywall can take absolutely any form, with properly chosen lighting allows him to play with the light and transform space.Volume ceilings with carved niches in the photo looks quite original, in addition, the drywall can create different geometric shapes that do not look bored, even in one color.

Stretch ceilings with built-in niche complementary lights.Such a method is especially important in rooms with low ceilings: visually it makes the room above.

often niche ceiling looks like a false ceiling, which is located at a certain distance from the ceiling.Since the recess is designed mainly for its location in the eaves or curtain suspension system, and equips it with the opposite wall of the window opening.Plan design can be of different sizes: the width is designed according to the dimensions of the suspension under the niche.Thin string hangers successfully decorated by shallow niches (3-4 cm), and massive fasteners for curtains require niche widths from 10 to 25 cm.

original built-in lighting can dramatically transform the design space.When planning a lighting system you need to consider in a special niche shelf for LED strip.Curtain lighting must be provided with a separate switch so you can control the lighting of the room.Creating your original repair the ceiling, it is necessary to consider all the details, so as not to spoil the aesthetics and appearance of the premises.About creating a niche for stretch ceiling is necessary to take care in advance, because it is impossible to cover the mounted canvases cornice.Niche for curtains in Stretch ceilings - is the most rational option allows to hide the ledge, make curtains of lightness and weightlessness and the beauty of the room.

niche in the ceiling perfectly fit into any interior: office, restaurant and hotel.This simple design solution will emphasize style room feature, and in combination with light give an atmosphere of romance in the bedroom and in the living room provide comfort.This design not only looks solid and dignified, but also allows the use of rails with different mounting methods.Trendy design an experiment suitable for people with good taste who do not accept the ordinary and see the beauty in simple detail.

niche in the ceiling with his hands

suspended ceiling of plasterboard is the best design for the installation of the ceiling opening.And the most acceptable version niches everything - is to create it in the process of securing the ceiling frame.

Manufacturing process:

1. Before you make a niche in the ceiling, you need to apply markup.For this purpose, the ceiling parallel to the wall with a pencil, draw a line.The distance from the wall must be equal to the width of the mounting rails for curtains.Experts advise even with narrow niche width hangers do not less than 12 cm, due to the fact that the curtain must be placed freely therein.A narrow niche will create creases in the fabric.
2. on available markup proceed to the installation guides for the frame profiles.The most convenient way to start up a wide profile at the edge of the niche (10 cm).If not, then fix the ceiling starting profile, but to him Mount the rack from the main profile.Then they attach another profile starting at the level of the lower plane of the ceiling.
3. Use the screws to connect the entire design of plasterboard.
4. Plasterboard close the inner slope of the niche, and ends treat the plane.The width of the strip of drywall should be equal to the depth of the niche.
5. If you plan to make a niche for curtains with light, the LED transformer can be hidden in the ceiling directly.Tape with lamps should be placed on the bottom shelf serving niche.
6. Niche for curtains in the ceiling is ready, it is now necessary to apply a layer of putty and finishing.After drying proceed with the installation of the cornice for curtains.

niche in stretch ceilings with their hands

in stretch ceilings do nizhu very difficult, but possible.

Manufacturing process:

1. with dowels with plastic or metal sleeves to attach the ceiling cornice.Make it better before the suspended ceiling will be installed.The only way you will be able to roughly determine the size of a future niche.
2. Stepping back from the eaves to 2 cm from the ceiling hook the timber from the tree, which will be a support for the tension of the coating.Make sure that the lower edge is flush with the surface.
3. clings to a tree along the entire wall, that it is positioned exactly.Then start to install the suspended ceiling.
4. to the inner disposed to the window side of the timber, attach the metal profile and fill it in cloth so that it is completely concealed timber.
5. As a result, should get a niche under the eaves in suspended ceilings.It can be seen only near and from afar it would seem that the curtains serve straight from the glossy fabric.

niche in the ceiling of plasterboard with backlight

Almost everyone who dares to work with plasterboard, are wondering how to make a niche in the ceiling, further illuminated by LEDs.

This version, made of gypsum board, has some undeniable advantages:

• because the drywall in conjunction with the metal profile is resistant to heat, plasterboard ceiling can not be limited to the amount of light;
• since in itself a strong frame structure, the fixtures can be mounted directly to the profile;
• plasterboard ceiling hide not only the wires and light bulbs, exhaust pipes, and other minor defects in the room.

work Technology:

Initially working with plasterboard ceiling on a piece of paper, configure lighting location, current transducers and terminal boxes.Eyeliner should be tightened to the places where they will be in transformers and lighting fixtures only after mount the frame of the metal sheets.After that, you can begin to trim gypsum boards.

1. building level on the ceiling make the layout according to which attach the metal profile for the frame.
2. mounting frame with ceiling start guide profile.It must be screwed to the wall with screws in increments of 30 cm.
3. Further, according to the markup, the horizontal segments are attached profiles and racks.
4. Once the profiles are mounted, route the wiring with a cross section of not less than 1.5 square meters.All connections must be carried out using the terminal block.
5. When the wires are routed, you can begin to trim frame plasterboard, using a screwdriver and screws.
6. Upon completion of the work, all the seams zashpaklyuyte previously papered their paper tape or mesh reinforced ceiling.Putty irregularities preferably 2 times, and after the second layer has dried, it oshkurte sandpaper.

So niche is ready, it remains only to mount a backlight, which can be selected according to individual preferences:

• if you did open a niche in the lighting can be used as an LED ribbon.It is lean and flexible and pliable, and therefore, easily takes the required shape;
• in DIY stores today you can also buy special ribbons of different colors RGB.Their main drawback - it's inflated price;
• can purchase a sealed LED tape for areas with high humidity.She is not afraid of wet cleaning, and water ingress;
• help regulate light intensity dimmers, which are classified by the number of LEDs per meter tape.

Since tape with LEDs consume voltage of 12 V, then the normal 220-volt outlet can melt the wiring.Thus, it is better to share the switching power supply.

If you have equipped in your apartment closed niche, then it is possible to hide the larger and more powerful lamps.They, of course, will also shine brighter.

niche in the ceiling of polystyrene

In order to construct such a niche, you should use the building with a knife, a gun with liquid nails, electric jigsaw, level and tape measure.

done on the ceiling proper layout, you must paste the ledge at 10 cm from the ceiling, concealing the most minor irregularities on its surface.Gluing lightweight frame can be as wallpaper, and the blank wall after priming.

ceiling niche of polystyrene weighs much less and is easier to install, than the gypsum frame.However, with this material has a lower strength and heat resistance, therefore only suitable for use with LED self-adhesive tapes.The power supply also should not attach himself to the cornice, as a result of heating it can melt the polystyrene.

Installing a light construction can fulfill yourself in just a couple of hours and you do not even need professional help, because everything is very simple.

How to make a niche under the eaves.Video