Repair of a private house with his own hands facade

Repair facade of the house with his own hands must begin with the embedding of existing cracks in the facade of the house.If there are no cracks, then you are lucky, and if not, then our article with photos and videos to help you!Where to begin?To begin, remove the upper layer of old house decoration, in order to determine the size and depth of crack.After "otkovyrivaem" material on the sides of the slot for a better grip further cement its c.Gruntuem.

Most often need to fill them with a grout and putty reinforced top cover, but you can fill out and use the foam.If you have concerns about, crack depth, it is better to strengthen the reinforced mesh.Using a spatula, apply glue and glue it on the screen (make sure that the grid is not performed and snug).If fault in masonry, it is necessary to shift the whole lot of bricks, but if you plan zashpaklevyvat masonry, the principle remains the same.

Repair work is finished, move on to preparatory.It is necessary to clean the walls of the remnants of "old times."The next step - the primer.With a roller handle house wall at least twice.The primer, as well as all follow-up materials, we take for external works (eg, acrylic).After drying it is necessary to align the walls and corners.To align angles impose on all corners of the house, which it is required.With the help of plaster align all the flaws of the house.The thickness should be about 2 cm - less.After drying the skin.Now the facade, as in the photo, ready for application of decorative plaster or plaster before painting.

A simple repair of the facade of a private house with his own hands with the help of plaster "bark beetle": knead the solution in the bag, as instructed by your plaster.Observe the nuances: the water must be 15-20 degrees, it is necessary to pour the mixture into the water (not vice versa), after stirring for 2 minutes is necessary to wait, then move again.Knead a small amount.If you have no experience, to achieve accurate results you will be a long time, so the solution dries.Layer coating according to the size fractions indicated on the label.Using a metal spatula we put the plaster.Each row is to be applied closely to each other.

For convenience, you can, with the help of a level raschertit small area and work in parts.To do this, the adhesive masking tape at the border, we reach it, after drying (about a day) and peel off the adhesive on the back part and causes the same thickness layer of plaster.To check the degree of dryness using a plastic grater - if the sticks - is not ready.The last stage of mashing.Held vertically, horizontally, or movement in a circle.Grated do not need to apply pressure and create a "wave".After you reinstall the front row, just move on to the second rubbing.To smooth the joints sprinkle them with water.Do not share the whole process for lunches, smoke breaks, and so on - it is desirable to do everything at once.The most favorable season - spring or autumn and windless weather.

For clarity, you can see below renovated facade of the private home videos with their hands .