Booths for dogs with their own hands

Dog - this is the most faithful friend of man and an important member of the family who needs their own homes.That's why owners of such animals are often the question arises: how to make a booth for the dog?Of course, on the market today, you can buy a ready home for your pet.However, such a purchase "afford" not to each person, so you can build a warm kennel for the dog with his own hands.

to booth for the dog, made with his own hands, came out strong, beautiful and comfortable for your pet, the following materials must be prepared in advanceand tools.

Materials

1. Self
2. Bruce
3. Plywood

Tools

1. Saw;
2. Electric drill;
3. level;
4. paint and brushes.

Step by step instructions of building doghouse

If you do not know how to build a kennel for the dog, you can use the following instructions:

Drawings

to begin construction, you definitely need detailed drawings of the booth for the dog.They will need to specify the exact appearance of the booth, calculate its size, features and other important points.Create a booth scheme is simple enough for a dog with his own hands, because only need a clean piece of paper, a ruler, a pencil and a little ingenuity.Or just to see ready-made options in our article.

Preparation plywood

For building can use standard sizes booth for the dog, but you can adjust them to your specific pet.Nevertheless, it is recommended to use the first option, since it does not require additional calculations.In a second step with a saw cut a piece of plywood under the required dimensions.

Basis booth

If you want to build a warm and solid doghouse with your hands, you should very seriously consider the construction of the foundations of the structure, as it was on it will be borne by all loads.So, first put the two boards parallel to each other and perpendicular to them to set the bars, attach them using screws.Then, the substrate plywood fastened, and supporting it on the edges of the frame.

Installing the rear and side walls

Robust wooden box for the dog must have good support frames throughout the structure.That is why you need to install the finished ground angle of the beam.During their installation it is necessary to use builder's level, to monitor the precise perpendicular beams floor.Then, attach the recess dovetail and set screws on the side walls.The rear wall is established similarly.

Rafters

First you need to collect from the bars two triangular design, and then fasten them to the front and rear panels.If you do not really understand the process of assembling the rafters, you can view photos and videos directly to the construction of booth this article.

Installation of the roof and the back of the booth

roof of plywood fastened to the rafters by means of screws.In the same manner and set back of the booth.

Installation of the front wall and the faceplate

Please attach a front wall made of plywood.If you need to enlarge the hole in the wall for the entrance and exit of the dog, you can use the jigsaw.Then install the front panel, which covers the lower bar.After that you can paint booth and present your pet!

construction Video booth for the dog with his hands