Installation of metal with their hands

Installation of metal on the frame house can protect the structure from rain, giving it a stylish look.The duration of such work depends on the characteristics of the house being built (square shape of the roof).Perform installation of a new roof can any homeowner.He only need to choose the right materials, to explore more of the work instructions.

Drawings and roof scheme of metal

crate

to secure the roofing is required to prepare a solid and reliable crate.It consists of wooden planks, determines the slope of the roof.recommended mounting angle of the rafters with more than 14-15 degrees for optimum discharge of sediments.Between the three extreme boards need to install additional jumpers.This will give a gable roof construction a large strength and protection from strong winds.

next stage is laying parogidroizolyatsionnogo material.Pretty well proven steam Izospan.The material allows for really high-quality roofing installation of metal, eliminates the accumulation of moisture under the roof and the destruction of wood elements.

Next kontrobreshetka performed.Its purpose - the creation of an air cushion between the metal tile and insulating layer can further secure web material.

Before installing the need to prepare kontrobreshetki used sticks and boards.Take cover elements antiseptic to maximize service life.Then the bars are attached directly to the rafters.

Next, you crate: horizontal boards are fixed from the bottom to the top of the roof.The distance between them should be about 25-30 cm.

Step by step installation instructions metal

To begin the installation of metal should be after the installation brackets.They are set under the level are secured to the bottom board.

In brackets are installed gutters installed drip.

closes drip waterproofing.

Further installation of metal is carried out as follows:

1. Rises metallotserepitsy first sheet (work begins from the edge), is fixed at the top.

2. Held screwing sheet to the boards using roofing screws (the entire length and width).

3. Implemented lifting of the second sheet, it is applied to the first (enough for 1 lap band).Locked in a similar manner.

4. Held stacking sheets remaining until the edge of the roof.

5. Work on a similar statement holds for the second side of the roof.

next stage is installation of the ridge.

for its smooth arrangement is necessary to pull the thread between the gables.

Next record element at one end, to hold the fixation in the joints, keeping the evenness of the location of both parts.

Next held its binding to the opposite edge and runs the entire length of the fixation.

Next set snow stop.

Completion

In addition to information on how to mount the roof of metal, the contractor should bear in mind the need for high-quality end closing of the roof wall.To work need to use OSB boards.They have a low weight and are ideal for the construction of a frame house.Mount the plate must be on the inside - the attic.

Initially, the executor will need to conduct measurements and make the marks on the plate, according to which bude executed its trimming.Primarily harvested side portions of triangular shape.After their installation is performed fitting top and bottom.It is important to bear in mind that in the attic need to leave an opening for the subsequent installation of the window.As soon as the last part of the plates will be installed, the assembly of the roof gable ends.For a detailed examination of all the above steps, starting with the mounting of the insulating layer and to the closing of the end walls, it recommended further review the accompanying photo and video tips.

Video installation of metal with their hands