Build Daily

Fences

August 12, 2017 18:05

Decorative fence with his hands

click fraud protection

Today, many urban people take out of town land and build houses.It can be as an apartment house and cottage.But any home remains incomplete, not only without upgrading the site, but no fence.And if you can invite experts, the fence can be made most for the construction of the house.But for this you should decide how it should be.

Content

  1. choice of material
  2. construction decorative fence
  3. Photo Decorative fence
  4. Videos manufacture decorative fence with their hands

choice of material

One option - to dodecorative fence with their hands for the building which you can use different materials.It will serve not only the protection of not welcome guests, but also as a decoration.Today, conventional fence is no surprise, but with a decorative fence, as in the photo, it is possible not only to impress the neighbors and passers-by, but also to do around the house a cozy corner.

Many are thinking about how to make a decorative fence, and what should be the material for this pick?There are many options, it is necessary only to connect your imagination.This can take a variety of materials: boards and bricks, stones, or rods.Use is possible even to glass and plastic bottles.Moreover, you can create a decorative fence to give in the form of an external enclosure, and for delineation of the internal areas.

Probably the most original version - a decorative fence of branches or vines.These fences were built a long time, why not go back to using this material again?In order to make such a decorative fence with their hands, you need to prepare the following materials:

  • stakes (preferably oak);
  • battens or boards;
  • thin bars (best for one-year from willow or vines);
  • ax, hammer and antiseptic.

construction decorative fence

Below are photos of the decorative fence made with their own hands, having familiarized with which you can have an idea of ​​what kind should have a fence.If in the process of self-construction of the weaving difficulties arise, you can see the video, which is available at the bottom of the article.

should be a sharp knife to cut the bars to be good to steam in the water.This is done in order to make them more flexible.In water they should be day, and only after that it can be used for weaving.All columns are processed antiseptic, so that they could as long as possible to stand in the ground.You can use both vertical and horizontal way of weaving vines.For example, the fence from the street can be done using the vertical netting, and then it will look like an ordinary fence.A horizontal way possible within the fence of the yard a lot, or pass to the house.But for vertical weave need armor between the staves.

netting In vertical bars are fixed at a distance from each other 2 meters, and between them are attached to 3 bar.And then between these beams is woven alternately vine: first before the upper beams, and then for the average board, and again before the beam.Next vine - in reverse order.And so on until the end of the fence.As a result, we obtain a decorative fence, as in the photo.

If you want to make a decorative fence for flower beds with their own hands, you can use the horizontal weaving method.In this case, hammered into the ground at a distance low pillars about 1 meter apart, and vine woven in the same manner but in a horizontal manner.Vine alternates: the front of the column, then the rear.And the next row - in reverse order.If necessary, you can already woven bars ram a wooden mallet.

Photo Decorative fence

Videos manufacture decorative fence with their hands

instagram viewer