How can I make a septic tank with your hands ?

There is such a system in the house, which it is impossible to live without, and it is nothing more than a septic tank, which enables our life convenience and comfort, so the solution to the question - how to make a septic tank with his own hands, is more than relevant.

If you decide to make it self-improvement, it is not superfluous to know some details.

For example, its structure can be accomplished in two ways.

The first is to install cumulative capacity of large volumes at the same time will require systematically produce the pumping of water.

container itself can be made in any form and from any material.

As for the second option, it will enable wastewater treatment with the possibility of their recovery, and possible drainage is relatively clean water directly into the ground.

last option we will consider in more detail.

So, installation of a septic tank, as one might expect, is to be made to the maximum effective - it will get rid of a lot of trouble in the future, ensuring the serviceability of his work.

immediate task which is assigned to the septic tank, is to clean the water and its subsequent return to nature.

In that case you will be allowed emissions in the garden or in the ditch of contaminated water, the characteristic smell appears in the District that definitely will not please you.

If the drainage will be installed in the ground, then you may encounter is the fact that he simply quickly silted up, and then all work will cease, polluting the environment.

Pretreatment can be performed by applying an anaerobic method that provides for the use as core cleaners microorganisms.

Meanwhile, the cheapest way in which it is possible to produce water treatment - this is the way anaerobic rather than any other.

It requires only a conventional well, water in which both advocates and, at the same time, subjected to processing carried out by micro-organisms.

It is about such a design and question, when it is assumed (to build a septic tank with your hands).

process of construction of a septic tank

First, we need to make a calculation of its volume, thus used as the basis of estimated consumption volume of water the whole family.

For example, for three man needs about 1,200 liters / day, the water has to settle for two days, so the volume should be at least 3.6 cubic meters.

then to do a septic tank with your hands, you will need to dig a hole, the depth of which must be 4 m and a diameter - 1.6 m.

Also in this hole will need to build in reinforced concrete rings in the amount of four pieces.

Going from house sewer must certainly be buried at a depth of soil freezing, that is, at a depth of about 1.5 meters.

Video:

Well, if you have a septic tank is insulated, despite the fact that there is a perception that the waste water is not subject to freezing.

deciding to build a septic tank in a private home, should take into account the fact that sewer necessarily must have a slope of about 2 cm to 1 m, but not more than that.

Otherwise - draining liquid effluents occur faster in the pit, and the flow of dense, do not have time for them, as the sediment is on the pipes, which invariably trigger their emergency blockage.

The pipe is installed septic tank tee, which will allow water to drain down.

At a distance of 2.5-4 m from the septic tank is also necessary to dig out and drain well, with its depth should be about 7 m, and the diameter - 1.7 m