Stroebe walls by wiring

Since shtroblenie walls for wiring, it is necessary to take care of the presence of the corresponding resolution in ZhEKe.

Before the eyes must be a project with a new arrangement of boxes, switches and sockets, as well as the diagram of the current wiring in the room.

Shtroblenie - a very laborious process.

In the process, it is necessary to arrange good ventilation of the room, as many forms of pests dust.

All doors to other rooms are to be hung with a damp cloth.

Select tool

The first step is to choose the tool shtrobleniya walls.Level, measuring tape and a pencil - the most necessary accessories, without which the work will not take place.

Video:

very same shtroblenie will be carried out using a special technique:

• Bulgarka;
• Punch;
• wall chaser;
• hammer and chisel.

most handy method - shtroblenie walls under the grinder wiring.Such a tool should be in every garage owner.

for work will have to buy a special diamond blade diameter required (should last only one instance).

Among the advantages of this method can be distinguished:

1. Easy;
2. High performance;
3. turns out perfectly flat Stroebe.

significant drawback of only one - produces a lot of dust, get rid of that does not help even a pre-wetted surface.

Video:

should be completely free from the room furniture and foreign objects, open windows on plowing.

most popular way - wiring under the walls shtroblenie puncher.

It is easier and more productive, but has several significant shortcomings:

• lot of noise;
• Strong vibration.

undesired cracks can form in the plaster, which will have to cover up.

Stroebe turns rough and coarse as if scratched.It must be properly matched to the nozzle shtrobleniya walls - usually sharp "peak" or a flat "blade".

There is a special tool for shtrobleniya concrete walls - wall chaser.

It's kind of a modified Bulgarian, which is equipped with a special platform to move along the wall and a pair of disks.To him also connect dust extraction.

Specially designed for such work, the model as soon as possible make perfectly smooth groove for wiring.

Instructions shtroblenie

Getting Started, you must determine the type of wall as shtrobleniya process under each of them has some individual features.

First of all you need to get acquainted with the plan of the house and find out where lies the old wiring.There are special indicator screwdriver for the task.

shtroblenie If you want to load-bearing walls, the groove can be done only in the vertical direction.Horizontal Stroebe can significantly reduce the rigidity, which can not be tolerated.

There is a special SNP on shtroblenie bearing walls, which describes the basic rules and permissions.

Video:

It has a number 3.05.06-85 and also prohibits the wiring pad horizontally.It is possible to bypass the rules and make the appropriate groove depth which do not exceed 2 cm.

The maximum length shall not exceed 3 m.

Shtroblenie monolithic walls and completely prohibited the regulations.

possible serious disruption of the surface layers, which protect the reinforcing mesh against corrosion.It can hurt the most and fittings that will significantly reduce the reliability of the design.

If carried shtroblenie walls in pre-fabricated house, here, as in the case of load-bearing walls, it is forbidden to cut the horizontal grooves.

The maximum depth should be selected so as to not get the reinforcement cage.

Otherwise - you can deform the structure or receive a fine during the scan.

If the depth is not sufficient, it is necessary to apply an additional layer of plaster or sheetrock to hold the alignment.

to drill holes for the socket using a special diamond crown fixed diameter (65 mm for the euro and 80 boxes for domestic) under the drill or a hammer.

On a similar principle is carried shtroblenie brick walls and concrete.The most important thing - to adhere to a work plan and a set of rules.

must be remembered that the creation of fissures along the shortest path - the diagonal, is strictly prohibited.

The best way - to exercise shtroblenie concrete walls horizontally from the electrical box, which is often placed on top of the wall.

Video:

In places where the socket is vertical descent will be installed.So, you do not have to guess in the future, which is an electric cable.

By shtroblenie walls under the socket, the height of its location can be absolutely anyone.

All electrical appliances should be located in the expected places, and be easily accessible.

However, there are a few rules prohibiting:

• sockets and boxes should be removed at least 1 m from the water pipes;
• install switches stands at a height lowered his hands;
• Sockets, used most often - at a height of 0.9 m;
• sockets used at least - at the height of 0.3 m;
• not allowed to wave wire bends;
• When shtroblenie concrete walls for wiring is not possible, special cables in the gutters.

every 30-40 cm in Stroebe is necessary to fix the cable plaster solution or special plastic clamps.

After wiring, the wall must be plastered.

Prices for services

Before laborious work, you need to ask how much it costs shtroblenie master walls.

This eliminates a number of hassles and unnecessary trouble.

On construction market price shtrobleniya walls for wiring depends largely on the walls of the material (rubles per meter):

• Brick - 250;
• Plaster - 200;
• Concrete, monolith - from 300.

shtrobleniya However, the cost of the walls under the wiring is not limited to the creation of the grooves.

Optional amenities:

• laying electric wires - 30 rubles;
• Putty Stroebe - 30 rubles;
• Drilling holes - from 50 rubles.

Thus, prices for shtroblenie wall construction team for many may seem quite acceptable.

But if you need a full refurbishment of the wiring throughout the apartment, and has all the necessary tools and desire at hand - you can save a lot of money and do it yourself.