Spray for ceilings and walls - how to use?

painting surface with a large area always takes a lot of time and effort, and to greatly simplify the workflow, it is recommended to use in this case, the gun for ceilings and walls.

In most cases, painting the walls or ceiling in the apartment is made by roller or an ordinary brush.

Typically, in this case to work takes more than one hour, and in addition, a great number of physical expended effort.

Also of note is the fact that very often surface after painting with a roller or brush on it noticed the various stains and drops, and in addition, not always paint falls evenly and smoothly.

Meanwhile, in our time for the color quality with a large surface area can be replaced by manual labor automated by using a device such as an electric gun.

Spray is an excellent alternative to roller brush and do a lot of work with the use of latex paint or whitewash, if necessary.

If you know the technique of painting the ceiling or wall surface using a spray gun, the work can be done quickly with a minimum of physical effort.

advantages of working with a spray gun

ceiling painting in an apartment or house - work is quite complicated and time-consuming, and if you perform it atusing a roller or brush, then it may take a lot of time and effort.

In addition, not only to make the composition on the base went smoothly and without streaks.In this case it is best to take advantage of such a universal device, like an electric gun.

This machine when applying water-based paint or whitewash on the basis of a large area has a number of advantages.

First of all, it should be noted that by using this unit sharply increases productivity and volume of work performed.

applied to the base layer of latex paint or whitewash it turns out not only smooth, but also the most delicate, which in turn reduces the cost of material.

almost completely solved the problem with the heterogeneity of applying a layer of the composition on the base of the ceiling.

In addition, the use of this machine allows you to easily reach even the most remote places on the ceiling or walls.

When using spray gun produces less dirt, and reduces to almost zero the risk to stain clothes and room paint.

It should be noted also that the base paint with latex paint using a gun makes it possible to avoid the formation on the surface of all kinds of divorces and strips, which often occur when using a roller or brush.

This unit can be used not only for the base paint with latex paint, but also for its whitewashing and plastering and varnishing.

addition, significantly reduce the cost of the composition is used as sprayer for uniform coloring base consumes a much smaller amount of material used.

The video, which is available below, you can see how with minimal effort using the gun to quickly paint latex paint ceiling surface.

Video:

Types spray guns

Currently, in specialized stores you can find a wide range of spray guns designed for painting or whitewashing of different types of foundations, including the ceiling.

most available are manual type device.This machine is a certain size pipe which is connected to a special pump.

order to bring it into effect, it is necessary with a pump attached to the reservoir to create a certain pressure, and then sprayed on the surface of the tube working composition.

This simple device can also be used to whitewash the base.

With manual type gun can be a short period of time used to cover evenly composition the ceiling with a large area.

very popular spray guns with an electric drive.

These devices allow you to do the necessary work as soon as possible, and do not need to use any additional equipment for their use.

Today you can find the different versions of electric spray gun, but it is best to use the model, which is sprayed on the surface composition of the airless method.

Video:

also for whitewashing and painting the ceiling bases often use spray guns pneumatic type.

These devices are usually referred to professional equipment, as they are suitable for use with virtually any compositions.

Operate spray guns pneumatic type through the use of compressed air, which is responsible for uniform distribution of the coloring composition or whitewash for the ceiling surface.

use gun

Before painting the ceiling surface as a roller, and this type of machine, it is necessary to carefully prepare.

To this base is cleaned of dust and dirt, as well as a variety of clean oil stains.

Next should be prepared to work very coloring composition, which should be familiar with the bundled instructions.

very composition that serves to be well and free of lumps and various films.

If it adds an additional color scheme, then you must ensure that it is uniformly distributed throughout the coloring composition.

Experts recommend use carefully before using the composition to filter what can be done, if you skip it through a thick cloth.Paint

base using an automatic painting machine is different from a roller that is necessary to use the respirator as the air in the process will be a large number of mixtures.

about how to properly use this type of machine for the painting of the ceiling base, described in detail in the video below.

Video:

Before you start painting the ceiling directly by the need to pour paint into a special container, after which the nozzle device move aside and make a trial descent.

This is done in order to release the air from the hose of accumulated dirt.Once the nozzle will ink uniform flow can proceed directly to the work itself.

To do so, send the nozzle to the surface of the ceiling at a distance of about fifty centimeters and press the start button.

ink jet should be directed to the surface of the ceiling as much as possible perpendicular, thus it is necessary to carefully monitor the uniform application of the composition.

Keep in mind that it is best to use your device the paint applied to the surface in at least three layers.

The video, which is available below, tell us more about how to properly use the device for painting the ceiling.

Video:

Ceiling Paint spray gun provides a smooth and uniform surface, but only in the case if the work is performed in accordance with the technology.

Painting this type of device is much easier than, for example, a roller, in addition, to complete the work takes much less time.

device can significantly reduce costs and consumption of paint, despite the fact that the quality of work increases several times.

In any case, the device makes color process not only convenient, but also the most accurate.