Subtleties water heater installation

solve the problem of hot water not only in the house in the country, but also in the apartment - will help install the water heater.

Currently, manufacturers offer several different types of water heaters, each of which can be installed in the house in the country, and in the apartment bathroom.

As a rule, the most commonly used today, or electric water heater storage-type or flow.

Both type has specific characteristics in their work, but in any case, each unit, if connect correctly, can supply hot water to the faucet and shower simultaneously.

Scheme of any type electric water heater based on the transformation of current into heat energy and hence from accumulating, and is required to flow device has a heating element.

In any case, if there is a connection diagram on hand, all the required tools and consumables, installation of any type of heater in a house in the country or in an apartment in a bathroom can be made with your own hands.

about how to install the water heater in the bathroom, at the same time to supply hot water to the faucet and shower, is told in the video, which is available in our article.

installation features and installation

Installing a cumulative and instantaneous heating type with the right approachto the point it can be made with their hands in the bathroom in the apartment and a country house.

Of course, to do the work properly, you must have the minimum skills of plumbing work and know the principle of operation of the selected cylinder.

During installation of the unit, do not rush, because you can miss out on any detail, with the result that there is a risk that the broken connection diagram and the device will not work properly.

Installation of water heater with your hands will allow significant savings on calling the master and will provide an opportunity to acquire experience in this type of work.

Install water heater regardless of its type carried out according to certain rules with regard to the safety norms.

Before starting the installation of water heating devices in the bathroom in an apartment or in a house in the country, it is necessary to think over every little thing.It is necessary to choose the right place, where it will be.

to the device must be freely accessible, not only at the time of installation, but also during the entire period of the subsequent operation.

You should also pay attention to the surface of the wall, which will be taken by the device itself.It should be free to withstand the weight of the device and have a flat surface.

should also pay attention to the condition of the wiring.For electric water heater type and quality of the condition of the wires has an important role and is a guarantee of safe operation.

Also, check the condition of pipes and risers in the apartment or in the country and make their replacement, if necessary.

at hand should be a diagram of all the connection on which the wiring pipes must also be indicated on the shower and faucet.

Choice

device Currently, the specialty stores offer a huge selection of water heaters of different types, but the person is arranged so that it is always looking for a device that will have a high quality and reasonable price at the same time.

In this case, an excellent choice would be the brand Thermex units, which are represented in a wide range.

Video:

devices Termex memory type are not only easy installation, but also a robust design.Thermex can be easily installed in a bathtub in an apartment or in a house in the country.

addition, installation Termex involves simultaneous supply of hot water, shower as well as on the faucet in the bathroom.

heater of the brand has a special safety valve, which protects it from various malfunctions.

Under the brand Thermex manufactured water heaters and flow type.These devices also are manufactured only from high-quality components, which guarantees their long life.

Scheme of water heater Thermex flow type involves the simultaneous flow of water in the shower and faucet installation in the bathroom.

In addition, a special safety valve installed on a flow device Termex lets not worry about his safety.

distinctive feature of all types of water heaters Thermex brand is that their installation does not take much time and can be made with your own hands.

In any case, when choosing a water heater for an apartment or house in the country to be, first and foremost, you should pay attention to both the quality of its execution, and the exterior.

should also ask and operating conditions, since from it depends largely on the usability of the unit in the future.

Installation flow heater

Heaters, water flow type have one characteristic feature - namely, compact size, which allows their installation directly under the sink in the kitchen or bathroom.

heating fluid in them takes place in a special metal flask, which placed powerful enough heaters.

In view of this, when this type of water heater you need to harness the country or in the apartment was in good condition and be capable of withstanding heavy loads.

is best for the water heater install a separate machine, which hold the wire with a large cross section.

Video:

After you have solved the problem with electricity supply, you can proceed to the installation of the device itself.To make its installation can be either on a temporary basis or for a fixed.

In the first case it is necessary in the pipe with cold water to embed a special tee and through the additional valve to connect it with the device itself.

After this will only apply for the boiler pressure and open the valve, designed for hot water.

Meanwhile, the fixed installation includes the necessary flow and fluid intake pipes in parallel to the general water supply system.

In order to perform the installation this way, it will be necessary to cut into the pipe tees, directly under the hot and cold water.Then sealed stop valves are installed.

This can be done using ordinary tape FUM or tow.After that, you must make a connection to the water heater inlet pipe, which is responsible for the supply of cold liquid.

Then, the outlet connection to the crane, which is responsible for the supply of hot water.

next step is to apply the water in the pipes and check the tightness of all connections, turn on the water faucet in the shower and at the same time.

If everything is working properly, then the water heater can be supplied with electricity, and then from the corresponding tap should go hot water.

To enhance the security of the whole system together with the water heater at the same time it is recommended to install a safety valve.

about how you install instantaneous water heater, described in more detail in the video above.

Set water heater

When installing the water heater storage-type, a wiring is not imposed such stringent requirements as to the flow.Additionally, the cost of such devices is much lower.

It should also be noted, however, that is quite common scheme in which the water heater at the same time provides water, shower as well as on the crane, which explains their popularity.

Video:

Install a water heater properly in the presence of all the necessary materials and tools, everyone can, and in a relatively short period of time.

first step is to check the condition of the wiring in the apartment and the water distribution system, and if there is any fault, they should be eliminated.

Next should be made on the wall under the water heater layout, and then secure the appropriate attachment.

then fixed on the wall itself heater as shown below on the video, then it will be necessary not only to bring the pipe with the wires, but also to mount a safety valve.

Once the water heater is installed, runs its connection to the water system and is connected safety valve.

Retrofitting is that the relevant inputs and outputs on the device are fed through the safety valve pipe.

to start installing and connecting the cold pipes, with a safety valve must be in the closed position.

Then you are installing pipes for hot water, and the safety valve must also be closed.

Video:

Next, you connect the device to the mains and check it in action.If installation

any cylinder has been performed correctly, the corresponding tap of the hot water will, with all connections and pipes will be in a sealed state, and the wires do not overheat.

learn how to perform the installation of the heater with your hands, you can find details on the video, which is available in our article.