Leveling concrete floor with their hands

If major repairs carried out in an apartment, then at some point, be sure to have a question on how to align the concrete floor.

In addition, with the need to make a flat surface in your garage necessarily face and motorist.

There are various ways to uneven floor with a variety of defects quickly convert a smooth base on which can later be put linoleum, laminate, tile or some other cover.

In order to align the floor in the apartment or in the garage there is a certain procedure that involves the use of certain materials.

most common ways that allow you to line the bottom of the apartment are leveling on beacons, by the filling the floor, as well as by building plywood.

not line the base of plywood because of inappropriate In turn, in the garage.

Each of these methods has both advantages and disadvantages, and therefore before to make a choice in favor of one or other way, should examine in detail each of them.

One way that allows you to align the base of the apartment or garage, is shown in the video posted below.

alignment methods

There are various ways in which the uneven floor in the garage or apartmentIt can be converted quickly into a smooth surface, which can then be laid tile, linoleum or laminate.

most common and practical is the alignment using special beacons.

The essence of this method lies in the preliminary draft on the basis of exhibiting metal slats, which subsequently grouting will be made.

If all the necessary work carried out correctly and in strict accordance with the technology, the result will be not only durable, but also the most smooth surface on which you can lay tile or linoleum.

The disadvantage of this method is the high cost and large amount of work to be done by hand.

most simple and efficient way, which will make the surface smooth and even, is the use of special blends that getting to the surface, rapidly spreading over the whole of its area, and thus possible to obtain high-quality basis.

Despite the huge number of advantages of self-leveling floor, there is one drawback, namely it can not be used on the grounds that have significant irregularities.

Another way that you can hide large irregularities of the floor is its capacity plywood.

Under the veneer can also pave the various layers of insulation and waterproofing, thereby greatly enhancing the quality of all work performed.

It should be noted that in order to align the base tile can also be used by means of which it is possible to play on a variety of irregularities.

How to align the base with his hands in the garage or apartment under the linoleum, laminate or tile, you can see in the video below.

Alignment beacons

One of the most practical and at the same time-intensive ways to make the base even and smooth, is the use of lighthouses.

Such a base may be carried out in a garage, and in the flat except that it is suitable for linoleum, tile and laminate.

All work is done with his own hands in exact accordance with established technology.

start all you need to conduct a markup.Make it easier by a special laser level, but you can use ordinary water.

necessary around the perimeter to designate a new base point, the thickness of which must be at least thirty millimeters.

is followed carefully prepare for the base by its priming using appropriate mixtures.

After that you can start putting up on the rough surface of the lighthouses themselves.

They should be exposed to the most evenly over the entire surface of the space where you plan to fill.

For these purposes it is best to use a certain length of metal profiles, which are mounted to the base by means of cement.

Before proceeding directly to the casting base, should once again carefully check the horizontal and vertical equality of all installed beacons using level.

Next is the solution to the desired consistency, and then proceed to the most filling and leveling the ground.

work begins from the opposite end of the entrance of the room, it should be to absolutely all the cracks and cavities were filled with the mixture.

used for leveling mortar on the surface of the base is spread with the help of rules.

After all the entire surface will be filled and leveled, it is covered with foil and allow time to ensure that the solution is well got up and got stronger.

top of the finished surface can be laid as linoleum and laminate and tile.

For more information about how to align the concrete floor under the laminate or any other facial covering with your hands using a beacon, you can see in the video below.

Video:

alignment using plywood

Align uneven floor in an apartment or house can be plywood.This method is considered the most base alignment simple and economical.

Make it quickly with their hands, everyone can, if you follow certain guidelines.

plywood can be aligned under the floor linoleum or laminate flooring, as well as for many other types of flooring.

lay on plywood base in several ways and it is the most simple installation directly on the base itself.

To do this, cut into sheets of the desired shape and size and spread over the entire surface of the room, do not forget to fasten screws.

In this case, it is recommended to use plywood thickness of not less than ten millimeters.To perfectly align the base of the plywood, it must be put on pre-furnished lags.

first step is to prepare the ground itself correctly.It must be carefully dried, cleaned of dirt and primed.

Next done laying of wooden lags.They are mounted to the base and to drawn layout, besides their flatness is controlled by a level.

pitch lags should be about fifty centimeters, and they should not abut against the walls and other surfaces.

After that you should set the transverse beams, and all the free space to fill crates waterproofing materials.

At the final stage of getting down to work with plywood.Its sheets are cut according to the markings, then stacked on the crate and fixed on the screws.

Paul, lined with plywood, you can lay a linoleum or laminate.

Video:

Align base in the garage

Base in the garage does not imply that the top of it is laid linoleum or laminate flooring, and therefore is performed in most cases with the help of cement mortar.

Usually equip the garage in the street and not much care about the quality and evenness of its foundation, but it is not correct.

floor in the garage should be possible to make the most of flat and smooth, allowing a more comfortable and pleasant to make repairs in the car.

addition, by aligning the base will be able to avoid the destruction and deformation of the rough layer, which means that the garage floor will always be in perfect condition and different from the asphalt street.

If we stick to the appropriate technologies and ways of working, perform the alignment can be founding their own hands without assistance.

starts with the preparation of the draft base, which must be clean, dry and covered with primer.

following is put a layer of waterproofing and insulation, as well as to make reinforcements base, which fits on the floor a special reinforcing mesh, which will help minimize the risks of cracking of the floor, and will significantly increase its durability.

Next on the floor exposed lighthouses, evenness which is checked using a spirit level.As beacons can use any metal profile.

At the final stage of the work produced concrete pouring to be done in one step.

alignment is performed with the help of rules, constantly controlling the evenness of the solution layer.

After the entire floor in the garage will be completely filled and leveled, it must necessarily cover with foil and allow time to ensure that he got up and got stronger.

Video:

In addition to all of the above methods that allow you to make the floor in an apartment or garage as much as possible smooth, there is still the same as Shpatlevanie.

It involves the use of certain polymeric components which are added to the quartz sand and applied to the surface.

In addition, you can spend grinding base, which should benefit from a special grinder.

also align the concrete floor in the garage or apartment allows milling method, but it involves the use of special equipment.

In any case, to make even the most concrete floor can be themselves in different ways, each of which has both its advantages and disadvantages.